Examples of 'push the saw' in a sentence
Meaning of "push the saw"
The phrase 'push the saw' is idiomatic and does not have a specific literal meaning. It may be used metaphorically to describe a situation where one unnecessarily or forcefully persists with a task that is likely to be futile or counterproductive
How to use "push the saw" in a sentence
Basic
Advanced
push the saw
Do not push the saw too fast.
Change blades when it is no longer easy to push the saw through.
Push the saw through the workpiece.
Do not push the saw.
Push the saw uniformly forwards.
Switch the machine on and push the saw downwards.
Push the saw slower when this occurs.
After unplugging the machine, push the saw hood downwards.
Push the saw steadily across the workpiece.
To keep the cut clean, push the saw forward at the same speed.
Push the saw forward evenly.
Move down the lock lever and push the saw table 3 back.
Push the saw downwards to reach the sawing depth.
During slide cutting, always push the saw blade away from the operator.
Push the saw head all the way back.
See also
It shall only be possible to push the saw band in laterally by 3 - 5 mm.
Push the saw blade into the blade clamp.
Unlocking the machine ( working position ) - Push the saw unit down slightly and remove the transport.
Push the saw unit backwards at an even rate of advance.
Goodbye, Lipeck. And don't push the saw so hard.
Gently push the saw into the work piece slowly.
Push the saw blade into the blade clamp as far as it will go.
Slightly push the saw head down 2.
Push the saw handle down and cut through the workpiece.
Don't push the saw so hard.
Push the saw forward at a speed where the blade is not laboring.
Gently push the saw handle towards the fence completing the cut.
Push the saw blade into the blade holder until it is heard to engage.
Pull or push the saw head to the desired angle using the bevel angle scale.
Push the saw forward at a speed so that the blade cuts without slowing.
Push the saw head to the rear and tighten the locking screw.
Push the saw forward at a speed that allows the blade to cut without laboring.
Push the saw forward at a speed which allows the blade to cut without laboring.
Push the saw forward to cut keeping the front guide wheel in the cut line.
Push the saw head fully back toward the fence and lock the rail lock knob.
Push the saw band guide 2 to the desired position.
Push the saw blade into the blade holder ( teeth facing cutting direction ) until it engages.
Push the saw blade locking device 34.
Push the saw blade 1 into the saw blade holder 12.
