Examples of 'quartz sleeve' in a sentence
Meaning of "quartz sleeve"
A quartz sleeve refers to a cylindrical tube or cover made of quartz material that is used to protect and enhance the performance of certain devices, such as ultraviolet (UV) disinfection systems or water filtration systems
How to use "quartz sleeve" in a sentence
Basic
Advanced
quartz sleeve
The quartz sleeve or liner survived intact.
Remove and clean the quartz sleeve.
Ensure quartz sleeve is properly centered in the chamber.
The water leakage of the quartz sleeve.
Remove the quartz sleeve and clean as noted above.
The lamps are isolated from the water by a quartz sleeve.
Check to ensure quartz sleeve is undamaged.
Minerals in the water slowly form a coating on the quartz sleeve.
The threaded quartz sleeve ring is permanently attached to the quartz sleeve.
Another problem is vitrification where the sand makes a portion of the quartz sleeve opaque.
The quartz sleeve and the head piece are two single parts.
Changing uv lamp and cleaning the quartz sleeve never look into a uv lamp.
Clean the quartz sleeve and polish with a soft cloth or paper towel.
This cleaning system was modified so that the sleeve moved along the quartz sleeve.
Then remove any coating from the quartz sleeve and reassemble it after cleaning.
See also
Unscrew head piece from reactor and then carefully remove it together with the quartz sleeve.
Push the quartz sleeve from one side until it comes out from the.
Insert new or old UV lamp into the quartz sleeve and attach the connector.
Clean the quartz sleeve using Laguna pH AdjustDown or white vinegar.
Insert the new UV lamp into the quartz sleeve and attach the connector.
The quartz sleeve and UV sensor should be cleaned at the same time.
The reactor is supplied together with a built-in quartz sleeve.
Insert new lamp into the quartz sleeve and thread into sleeve bolt until hard stop.
Re-insert the new UV lamp inside the quartz sleeve.
The quartz sleeve and sensor should be cleaned after each replacement of the UV lamp.
If there are limescale deposits, soak the quartz sleeve in a proprietary kettle descaling solution.
If the quartz sleeve can not be cleaned, it must be replaced.
Slide supplied O-rings onto each end of the quartz sleeve.
Insert quartz sleeve into the UV chamber.
Slide supplied and lubricated O-rings onto each end of the quartz sleeve.
Remove the quartz sleeve from the UV chamber.
If failure message repeats, clean UV sensor and quartz sleeve Refer to manual.
The quartz sleeve and / or the sensor window have become stained or dirty.
This receives the outlet 14 from the quartz sleeve which extends a certain extent into the faucet.
Quartz Sleeve replacement / maintenance, Minerals in the water slowly form a coating on the quartz sleeve.
Regular checking of Quartz sleeve and UV lamp is recommended.
The UV lamp 18 is located within a concentric cylindrical quartz sleeve 20.
Note, Ensure that the quartz sleeve does not slide through.
Reinstall the quartz sleeve with lubricated O-rings, followed by spring and retaining nut.
As illustrated, the opposite end of quartz sleeve 195 is closed.
Reinstall the quartz sleeve with lubricated O-rings, followed by O-ring, spring and sleeve nut.
Uv reactor Mounting clamp uv lamp & Quartz Sleeve ( inside chamber ) uv port cover open end.
Carefully, remove the quartz sleeve and second O-ring from the other end.
The water flows up and around the quartz sleeve 20, being irradiated by the UV lamp 18.
After replacing the UV lamp or quartz sleeve perform the disinfection procedure, refer to Section 3.2.
You'll also be interested in:
Examples of using Sleeve
Show more
Clean glass sleeve with a damp cloth
Sleeve with integrated load distribution ring
Roll up the sleeve on your left arm
Examples of using Quartz
Show more
W quartz halogen lamp if used without a filter
Do not use the quartz heater outdoors
W quartz halogen lamp if a green filter is used
