Examples of 'r-value' in a sentence
Meaning of "r-value"
r-value (noun) - a measure of the insulating capacity of a material
Show more definitions
- Resistance-value - A measure of thermal resistance used in domestic insulation.
How to use "r-value" in a sentence
Basic
Advanced
r-value
R-value is a calculative method referring to thermal resistance.
It has a higher r-value per inch than fiberglass.
R-value may be used without adjustment for aging.
Insulation effectiveness is measured by R-Value.
A higher R-Value means the insulation is more efficient.
This is an issue if you are only using R-Value to choose your insulation.
R-value is the measure of thermal resistance used in construction.
When choosing a specific type, R-Value is usually the most important consideration.
R-value is the term given to thermal resistance to heat flow.
By subsequent heat treatment, recrystallisation may be initiated for obtaining a desired r-value.
What is the r-value of corrugated cardboard.
The speed of this heat leakage depends on the r-value of the walls and ceiling.
The r-value of the steel is negatively affected by high stresses.
If you are not yet familiar with r-value references this will be a soft start.
An R-Value is a measurement of heat resistance used by construction and building industries.
See also
Be sure you know the R-Value that is right for your postal code.
They will also conduct an energy inspection and tell you how much R-Value you require.
The r-value is then used to estimate the hematocrit level in the sample fluid.
Use formula above to convert specification to R-value.
A higher R-value indicates good insulating properties.
A good insulation material has a high R-value.
R-Value is the measurement of thermal resistance.
Clicking on the R-value column sorts by lowest value.
R-Value is a rating of the material resistance to thermal penetration.
Does not lose much R-value due to extreme cold.
The R-value refers to the insulation properties of a material.
Insulation also loses R-value when it gets wet.
Its R-value is similar to other fibrous insulation types.
It provides a lower thermal resistance R-value than polyurethane.
Determine the R-value of the proposed alternate floor protector.
The effectiveness of insulated glass can be expressed as an R-value.
The R-value must be shown on the label of the product.
Windows that are of higher quality have higher R-value.
Identify the composition or the exact R-value of insulation material.
Insulation is typically referred to by its R-value.
Includes high R-value polyurethane insulation for better energy efficiency.
Insulation is generally indicated to by its R-value.
The R-value remains consistent for the life of the product.
Multiply the two numbers to get the total R-value.
Cellulose has a higher R-value than fiberglass per square inch.
The R-value will differ from building material to building material.
Make sure you get the R-value you were promised up front.
There are different types of house insulation materials, each having a different R-value.
In home insulation, the R-value is an indication of how well a material insulates.
What you really need to know is the R-value of the material.
Such an R-value provides a significant improvement over typical construction methods.
Foam insulation has the highest R-value of all insulation types.
A higher R-value prevents more heat from escaping through the insulation.
Boards are rated based on the amount of R-value that 1 inch of insulation provides.
The overall R-value of a building has a critical impact on home energy consumption.
