Examples of 'rabbet' in a sentence
Meaning of "rabbet"
rabbet (noun) - In woodworking and carpentry, a rabbet is a groove or recess cut into the edge of a material such as wood. It is often used for joining pieces together or for fitting panels
Show more definitions
- A longitudinal channel, groove, or recess cut out of the edge or face of a plank of wood or other material; especially, one intended to fit another member to form a joint; a rebate.
- To cut a rabbet in a piece of material.
- Obsolete form of rabbit.
How to use "rabbet" in a sentence
Basic
Advanced
rabbet
Clean the rabbet in the work surface.
The cord must be in the pole rabbet.
The rabbet is a notch or channel in the stem.
Side panel into the stem rabbet.
Narrow rabbet stop for maximum cutting length.
Plane as often as necessary to achieve the desired rabbet.
Rabbet is a word just like that.
Dadoing is cutting a rabbet or wide groove into the workpiece.
Rabbet lower line.
A dado is cutting a rabbet or a wide groove into the workpiece.
Rabbet of the keel.
Dadoing is cutting a rabbet or wide groove into the work.
The rabbet fence can be installed on either side of your planer.
He likes to leave his rabbet plane lying blade down.
The rabbet can just be seen along the inner edge.
See also
The depth of the cut can be adjusted for groove or rabbet cuts.
The width of the rabbet cut is adjustable by moving the edge guide.
It is thus proposed to immobilize further the metallic rabbet on the channel body.
The rabbet permits the back to fit flush with the sides.
Adjust the edge guide to the desired width for the rabbet cut.
The flange and the rabbet of each main beam can be coplanar.
Follow these steps to attach the edge guide for making rabbet cuts.
Securely tighten rabbet fence tightening knob H.
The edge guide included allows you to plane edges and make rabbet cuts.
Loosen the rabbet fence tightening knob H.
The latter is drawn around the entire external and internal periphery of the rabbet.
Securely tighten rabbet fence adjustment knob G.
Tighten the clamp bolt and note the position on the grade rod by the rabbet.
Loosen the rabbet fence adjustment knob G.
The planer comes with an adjustable edge guide for precision edge planing and rabbet cutting.
Rabbet followed by Rabbet.
Tanga applications Cuts using the rabbet stop.
The rabbet fence should be below the planer when installed correctly as shown in Figure 5.
The window frames manufactured by the Ateliers Tantôt Frères had a double or triple rabbet.
In some cases, for the sake of convenience, a rabbet may be replaced by two troughs.
Advantageously, the doorframe is standard and includes a conventional rabbet.
Rabbet and rabbet-like planes.
Temperature controller 6 may be bond to microarray chip 3 by mechanical rabbet joint.
This rabbet is used to receive the shutter device 12.
After gluing of the glazing, these straps are bent back into the rabbet.
Also provided is a second rabbet 1d for the housing of a second board 8 '.
All rooms, stairways and interior walls are constructed with wood and rabbet structure.
The term " shiplap " refers to the rabbet cut on the edge of each board.
It will be noted that this longitudinal lateral edge 24 is also called a rabbet.
A Rabbet on the vertical edge ( s ) where they meet.
NOTE, It will be necessary to make quite a few cuts for most rabbet applications.
FIG . 5 shows a rabbet obtained in a layer of formable material.
The second-floor lintels between the lally columns, should we rabbet them?
Turn the rabbet fence adjustment knob ( G ) to adjust the desired width of cut.
The external portion 111 ′ of the strip constitutes a rabbet for the end of the hinge.
