Examples of 'radial load' in a sentence
Meaning of "radial load"
radial load: This phrase is used in engineering and mechanics to describe a type of force or load applied perpendicular to the axis of rotation or an object's central axis. It refers to a load that acts in a direction that is radial or transverse to the center of the object
How to use "radial load" in a sentence
Basic
Advanced
radial load
Mechanical noise and high radial load.
High radial load and require little maintenance.
It is mainly used to bear the radial load.
Large radial load capacity.
Designed primarily for radial load.
The radial load is the prominent type of force on a wheel.
Each type of bearing is specifically designed to support an axial or radial load.
Radial load linear actuator.
Tests showed that considerable variations in radial load could be attained.
Radial load capability.
Sustain significant unidirectional axial load together with radial load.
Radial load bearing.
Suitable for slow rotational and oscillating movements under radial load and.
The radial load removed from the drive sheave is carried by the rope hitch points.
This extension provides improved transverse and radial load supporting capabilities for the tire.
See also
The drum motor is outstandingly robust with a strong torque and can take a high radial load.
It mainly bears radial load and can bear smaller axial load at the same time.
This concave platform helps distribute the radial load on the sides of the fuel rods.
Firstly, the radial load on the bearings of the machine is low.
Drawn Cup Needle Roller Bearings NA combine high radial load carrying capability with low cost.
High carrying radial load capacity, applicable to carrying heavy load and shock load.
The sliding bearings also serve handle the radial load should the elastomeric elements fail.
And meanwhile, they can also carry cetain radial load.
The upper diagram shows that the radial load position tracks the reference trajectory accurate.
The higher the stiffness, the lower the diameter change for a given radial load.
Bearing A is subjected to a radial load FrA and bearing B to a radial load FrB.
And radial load form drilling weight . We have the following two types of drive shafts,.
The clamping arrangement or connector produces a radial load applied internally by a compression ring 18.
With a cage, for high acceleration, high speed and high radial load.
The resulting radial load position and radial rope angle are presented in Fig . 6.
To obtain the operation state of the system, a specialized radial load flow algorithm is used.
High radial load capacity ;.
Cam Follower, This is another common type of radial load bearing.
Throughout this phase, there is no radial load exerted on the projectile 2.
In addition, the bearing can withstand axial load, but not radial load.
This force causes an undesirable radial load on bearings which support rotor 18.
Slide bearings ( housings ) are dry sliding ( shaft ) bearings designed for radial load transfer.
Weight Max . radial load.
C, mainly bear large radial load.
You'll also be interested in:
Examples of using Radial
Show more
Note where the radial artery was severed
Radial and ulnar arteries were both severed
I am checking for radial keratotomy scars as we speak
Examples of using Load
Show more
You can load up to five discs at once
Suppose you walk by with a load of cement
Lower the load to the bottom point
