Examples of 'radial movement' in a sentence
Meaning of "radial movement"
Radial movement refers to movement that occurs in a circular or radiating pattern from a central point. In dance or physical activities, radial movement can involve limbs extending outward or spinning around a central axis
How to use "radial movement" in a sentence
Basic
Advanced
radial movement
It can also be envisaged to have a radial movement.
No lateral or radial movement is possible.
The sleeve is capable of slight radial movement.
Maximal radial movement.
No radial movement of the mirror subassembly relative to the spigot is possible.
The spigots resist radial movement.
Thus radial movement is prevented and the middle gear ratio is set.
This arrangement allows radial movement of the guide rail.
Suitable mechanical elements may be used to provide the radial movement.
It is therefore necessary to limit radial movement of the bearing member.
The radial movement permits insertion in and interconnection with the torch.
This independence is provided by a telescopic radial movement of each of the detectors.
This radial movement is accommodated by the deformation of the resilient retainer means.
Thus the central sleeve allows radial movement of the column.
Radial movement of the pin in the opening of the guiding element is thus prevented.
See also
The pivotal fingers pivot upon radial movement of the folder.
This knowledge can be obtained by a sensor measuring the amplitude of the radial movement.
The elongated slots allow radial movement of the segments relative to the base.
The pads permit rotational movement of the turret but resist radial movement.
The radial movement is the one that causes variation in the value of this radius.
The limit stop element limits the radial movement of the clamp.
However, radial movement of the latch is preferred.
These figures also depict any exaggerated radial movement of the present system.
Unlike the opposite types, such a bearing is employed to be able to restrict radial movement.
Preferably said ring is guided against radial movement with respect to said axis of rotation.
In general, the purpose of these machines is to change axial movement to radial movement.
These forces cause a statically determined radial movement of the shell surface of the screen cage.
Unlike another types, such a bearing can be used in order to restrict radial movement.
Ii Excessive radial movement of top of column.
This pair of elements is fixed to a support for the radial movement of the forms.
It prevents substantially all radial movement of the shaft 5 as it passes through the bearing.
As a result, power can be transmitted without preventing a smooth radial movement of the belt.
This radial deformation provokes a radial movement towards the exterior of the fastening element 56.
Unlike the other types, such a bearing is used as a way to restrict radial movement.
This latter radial movement compresses the element 31 and consequently changes its initial coloration.
The second movement is a radial movement MR.
Unrestricted radial movement of retraction blade 218 is facilitated thereby.
A relatively large diameter due to the radial movement of the chambers, and.
In the reference frame of the spinning masses, centrifugal force causes the radial movement.
Radial movement is in a direction substantially perpendicular to the cutter axis 122.
As stated, there is also a reduction in turbulent radial movement of the spray particles.
Further radial movement or distortion of the bladder 14 is prevented by the outer surface 84.
This structural arrangement greatly reduces the amount of radial movement of the inner case 50.
This rupture enables radial movement of the second bearing 7 and of its support 19.
That is, the forms axially interdigitate with each other and block radial movement or expansion.
The thumb first causes radial movement of knob 16 to actuate latch 27 to the unlatched position.
In that case, the anti-backspin device comprises cavities configured to allow their pin a radial movement.
There is no part that impedes radial movement of the ring portion 601.
In this way, the parts 1 and 2 are immobilized against radial movement.
The core member is fixed against radial movement relative to the axis 30.
You'll also be interested in:
Examples of using Radial
Show more
Note where the radial artery was severed
Radial and ulnar arteries were both severed
I am checking for radial keratotomy scars as we speak
Examples of using Movement
Show more
There is movement in the house behind you
The right to freedom of movement and residence
Movement patterns of wild birds should be clarified
