Examples of 'radio camera' in a sentence
Meaning of "radio camera"
radio camera - A radio camera is a device that combines the functions of a radio transmitter or receiver with a camera, allowing for wireless broadcasting of audio and video signals
How to use "radio camera" in a sentence
Basic
Advanced
radio camera
No audio signal from the radio camera.
Radio camera image is not displayed.
Check if the aerial of the radio camera is screwed on.
Align the radio camera and the aerial differently.
I can use the radio camera.
Receiver of the radio camera system - select another transmission channel.
This is a lot better quality than my radio camera.
Align the radio camera differently.
These again can not be seen by one radio camera.
Point the lens of the radio camera at the desired monitoring area.
You can also select more than one radio camera.
The radio camera must not be exposed to extreme temperatures, intense vibration or heavy mechanical.
Time interleaving can also be used in the radio camera system.
Check if the channel for the radio camera has been switched off, see chapter.
The same channel has to be set on the receiver as on the radio camera.
See also
The enclosed radio camera usually has already been paired by the manufacturer camera / channel 1.
The supply voltage is pending at this plug for the radio camera.
Insert the plug-in power units of the radio camera system into the mains sockets.
The aerial receives the signal radiated from the radio camera.
Screen / DVR and the radio camera or align the aerials differently.
Several times per day and different settings per radio camera are possible.
Only one radio camera can be logged on to each channel of the screen / DVR.
In this function, the screen brightness for each radio camera can be set separately.
Each radio camera can be logged on to only one screen / DVR for reasons of safety.
Screw the ( white ) aerial to the respective socket on the rear of the radio camera.
Reduce the distance between the radio camera and screen / DVR.
The radio camera therefore should be installed at a minimum height of 2.5 m.
Align the aerials of the screen / DVR and the radio camera differently.
Check that the aerial of the radio camera and the screen / DVR is screwed on correctly.
Before firm assembly, first check whether the radio transmission between radio camera and screen / DVR is.
The radio camera is suitable for indoor and outdoor use IP65.
The original COFDM ensemble of carriers generated at the radio camera is shown in Figure 2.
Figure 1 shows a radio camera 2 providing a COFDM signal to a pair of receive antennas 4 and 6.
Mounting material for the holder of the radio camera 3x screws, 3x dowels.
Each radio camera ( up to 4 are possible ) must be logged on to the screen / DVR.
Use the " Pairing " process to register the radio camera at the screen / DVR.
Use the control button " " or " " to manually switch to a different radio camera.
Test the function by operating screen / DVR and radio camera at a distance of 1 - 2 m.
Secondly, delays 30b can not be seen by one radio camera.
Use the control buttons " " or " " to switch the selected radio camera on or off.
You'll also be interested in:
Examples of using Camera
Show more
Do not leave the camera on the floor
The camera should be installed by a trained professional
I connected the camera cable the laptop
Examples of using Radio
Show more
Radio says there is a storm on the way
There must be good radio signal reception
This radio controlled model is not a toy
