Examples of 're-fit' in a sentence
Meaning of "re-fit"
Re-fit refers to the action of refitting or adjusting something, typically related to fixing or modifying an item to make it suitable for a new purpose
How to use "re-fit" in a sentence
Basic
Advanced
re-fit
Re-fit all parts in their original position.
Well have to re-fit the reflectors tomorrow.
Connector may be incorrectly fitted re-fit connector.
Then re-fit the reservoir to the coffeemaker.
Reverse the above sequence to re-fit the cover.
Re-fit the lower trimmer head and tighten.
Unscrew lock and re-fit on the opposite side.
Re-fit the grease filters and extraction panel.
Both new build and re-fit projects are eligible.
Re-fit the plug and repeat the starting procedure.
After tightening the wheel bolts the caps must be re-fit.
Always re-fit the guard after finishing servicing.
After use remove the plug and re-fit the plastic cover.
Re-fit cover following the instructions above in reverse order.
Turn the coil around and re-fit it using the fixing screws.
See also
Re-fit the wedge immediately after the sink cut.
Remove the covers and re-fit when placing the vehicle back into storage.
Re-fit the reservoir to the appliance making sure it is firmly fitted.
Saw blade incorrectly mounted re-fit blade exactly as per the instructions in this manual.
Re-fit the drip tray using the screws removed previously.
Incorrectly fitted blade remove blade and re-fit exactly as per the instructions in this manual.
Do not re-fit the bleed system at the end of the season.
Make sure the cams are properly fastened and re-fit the upper casing of the actuator.
Re-fit the evaporator cover and the unit service panels.
Poorly fitted blade or blades Re-fit blade or blades.
Re-fit the spark plug and repeat the normal starting procedure.
They were originally slated for Prometheus on the next re-fit.
Re-fit the jet nipple and screw it tightly to ensure a gas seal.
Install 3 AAA batteries into the battery compartment and re-fit the cover before use.
Re-fit a full gas container following the same precautions as described above.
I am afraid the re-fit took too long.
Re-fit the rear side panels on the left and right side.
After cleaning, re-fit the filter by inserting.
Re-fit the two screws that hold the lid down using a screwdriver.
Remove cutting disc and re-fit the guard.
Always re-fit the riving knife it is an essential safety feature for normal use.
We now begin to re-fit the car.
Re-fit the drain screw with a packing ring after fuel tank emptying.
After completing this operation, re-fit the rubber protection.
And re-fit the wheel nuts in a reverse process of how you took them off.
Insert new brushes if required, and re-fit the brush caps.
Re-fit the steel protection pan and the cast iron broiler into their original position.
Re-engage the gears and re-fit the horizontal spindle retaining bracket.
Re-fit the inspection cover and twist it.
These sub-elements can be individually removed and repaired, re-fit or replaced.
Re-fit the brush roll into the housing.
Insert blade, replace blade bush and outer cap, and re-fit locking nut.
Re-fit the cartridge by following the description in section 4.
Remove the bail arms, attach cables as shown and re-fit the bail arms, if applicable.
Re-fit the cap, making sure it is tightened securely.
