Examples of 'reaction efficiency' in a sentence
Meaning of "reaction efficiency"
reaction efficiency: the measure of how well a reaction converts reactants into products, often calculated as a percentage
How to use "reaction efficiency" in a sentence
Basic
Advanced
reaction efficiency
The reaction efficiency should therefore be improved.
High alkalinity is necessary for good reaction efficiency.
Reaction efficiency is improved in terms of the shortening of reaction times.
The process results in improved product quality and reaction efficiency.
This reaction efficiency is then assumed to be applicable to the polymer in question.
The reaction conditions are judicially selected for high reaction efficiency.
The reaction efficiency generally rises as the reaction temperature rises.
Sulfuric acid is especially preferable from the aspect of reaction efficiency.
Reaction efficiency is improved in terms of the shortening of reaction times and the like.
Strengthening measures are taken to promote biological reaction to improve reaction efficiency.
It is considered that the curing reaction efficiency is increased by previously adding the amine.
Different methods can be used to determine a reaction point related to a maximum of reaction efficiency.
Testing the reaction efficiency of reactive compound building blocks before using them for library synthesis.
This structure further improves the reaction efficiency ( equilibrium conversion ).
Good reaction efficiency is obtained under the following operating conditions,.
See also
If such an atmosphere is employed, the reaction efficiency tends to be more improved.
The reaction efficiency was monitored by measuring the iodine value and by 1 h nmr.
All these factors can affect the reaction efficiency of the alkyl halide with the galatomannan.
Thus, the choice of solvent can materially affect the reaction efficiency.
Measurement of MDA reaction efficiency at elevated temperatures.
In some cases, the ligand can be selected to improve overall reaction efficiency.
As a result, a high reaction efficiency can be maintained.
As a result, the yield should not be automatically taken as a measure for reaction efficiency.
This indicates a reaction efficiency much lower than that of Example 1.
However, these methods are not necessarily satisfactory from the viewpoint of reaction efficiency.
Multiple displacement amplification ( MDA ) reaction efficiency was measured at different temperatures.
Of the two alkaline substances, sodium hydroxide is preferable because of high reaction efficiency.
Thus, the CT value represents a measure of the reaction efficiency that allows comparisons between reactions.
Further, the kit may also contain loop primers to improve the reaction efficiency.
The reaction efficiency was about 6 % and the copper deposit bright.
Typically, a stoichiometry of at least 2 is required to maintain reaction efficiency in a normally-closed cathode system.
The reaction efficiency and the degree of substitution introduced ( D.S. ).
Moreover, it is also preferred from the standpoint of the reaction efficiency and the cost.
With this arrangement, the reaction efficiency ( equilibrium conversion ) is further improved.
However, when these raw materials include free fatty acids, the reaction efficiency is deteriorated.
The nitrogen contents and the reaction efficiency of the products 2A and 2B are set forth below,.
Figure 71 depicts a diagnostic gel used to confirm combined reaction efficiency.
As a result of these effects, the reaction efficiency of the fuel cell 41 can be enhanced.
FIG . 71 depicts a diagnostic gel used to confirm combined reaction efficiency.
The correlation coefficient ( R2 ), and reaction efficiency for each target are also shown in Table 12.
A reaction temperature below 20°C may not be preferred from a viewpoint of reaction efficiency.
The R2 - value, reaction efficiency and melt curves are automatically formulated by the Rotorgene ® 5 Program.
As a result, separation costs are increased and reaction efficiency is decreased . '.
However, AtSUS1 polypeptide in a UGT-SUS coupling reaction system can enhance the reaction efficiency.
When a base, preferably NaOH, is used as catalyst the reaction efficiency is about 90 %.
A molar ratio of > 1.3, 1 will not generally result in further increase in the reaction efficiency.
Accelerate the reaction rate significantly, compared with the activated sludge process, reaction efficiency 5 ~ 10 times.
You'll also be interested in:
Examples of using Reaction
Show more
It would give its reaction at a later date
Quick reaction times in case of delay s or malfunctioning
I am having a physical reaction to how bad this is
Examples of using Efficiency
Show more
Improve the energy efficiency of a shopping centre
Efficiency and emissions requirements of combustion equipment
Liberalisation enhances efficiency of local insurance market
