Examples of 'rear roller' in a sentence
Meaning of "rear roller"
Rear roller is a term commonly used in the context of gardening and lawn care. It refers to a cylindrical or drum-shaped component attached to the rear part of a lawn mower or lawn roller. The rear roller helps to create striped patterns on the grass by flattening or bending the blades in alternating directions as the machine moves forward
How to use "rear roller" in a sentence
Basic
Advanced
rear roller
Turn rear roller adjustment screw clockwise to raise.
Reposition the rear roller adjuster.
The rear roller may be a full cylindrical roller.
Mounting for rear roller.
Each rear roller is provided with a separate hydraulic engine.
As an option carbide tipped blades and a rear roller are available.
Large steel rear roller guarantees minimal heave.
The belt is driven by a motor that governs the rear roller.
Not enough rear roller pressure.
The drafting apparatus comprises front and rear roller pairs.
Place the rear roller assembly onto the round rail.
Equivalent inertia in kg excluding the inertial effects of the free rear roller.
Do not use the walking belt or rear roller to lift the treadmill.
Turn rear roller adjustment screw clockwise to raise corner that is rocking.
Your refrigerator may have a rear roller adjustment screw on each side.
See also
Turn off the treadmill while adjusting or working near the rear roller.
Tighten the rear roller only enough to prevent slippage at the front roller.
As the shaft is fully withdrawn from the right rear roller bracket.
The frictional effects of the rear roller shall be disregarded when this is free.
On petrol machines the engine drives both the cylinder and the rear roller.
Front roller Rear roller Decorate rail.
Refer to the illustration below for location of the rear roller base adjustment.
At least one rear roller rotatably connected at the rear of the housing ;.
In one implementation both the front roller and rear roller are compressible.
In addition they have skids, rear roller or wheels for a better adjustment to the field.
Engaging Cylinder cutter and rear roller.
The fuel was used to cool rear roller bearing, which also preheated the fuel.
Lubrication of the two bearings of the belt 's rear roller.
Tighten the rear roller bolts ( clockwise ) only enough to prevent slippage at the front roller.
The apparatus according to claim 3, wherein the transmission is mechanically connected to the rear roller.
Use a hex-head wrench to adjust the rear roller leveling screws until the refrigerator is level.
However, when the direction of travel is reversed, the front roller now becomes a rear roller.
Rear roller tension & adjustment bolts.
The extension cable always passes the front roller of a pair first, then the rear roller.
The rear roller 60 may be a positioning reference in this respect.
Running belt Tension Adjustment - Adjustment must be made from the rear roller.
Turn the wrench clockwise 1/4 turn to draw the rear roller and increase the belt tension.
By way of example, the carriage has two freely-rotatable rollers, a front roller and a rear roller.
Loosen nut (G) and lower rear roller to the ground.
A 10 mm Allen wrench is provided to adjust the rear roller.
Loosen nut ( G ) and lower rear roller to the g round.
Heavy duty full-length rear roller.
Brake, front alloy V-brake PROMAX, rear roller brake, SHIMANO.
Using the T-wrench or Allen wrench, loosen the rear roller bolts.
Blades, drive chains, bearings, rubber on the rear roller and cables.
You'll also be interested in:
Examples of using Rear
Show more
Wall mounting the rear speaker system
The rear view camera is used as an aid to
Set mains switch at rear of paper shredder
Examples of using Roller
Show more
Remove the roller brush halves and re
You can count this high roller in
Turn roller adjustment screw to lower door
