Examples of 'reassembly' in a sentence
Meaning of "reassembly"
reassembly (noun) - The act of putting something back together or assembling again after it has been taken apart
Show more definitions
- The process of assembling something again.
How to use "reassembly" in a sentence
Basic
Advanced
reassembly
Reassembly is carried out in the reverse order.
Segmentation and reassembly protocol data unit.
Reassembly the front panel after cleaning.
Reconstruction and reassembly of disjoint or misplaced elements.
Reassembly in reverse order on the opposite side.
Disassembly and reassembly of all your furniture.
Reassembly has to be carried out in reverse order.
Clean off excessive grease before reassembly.
Incorrect reassembly can cause electric shock.
Spring must be assembled on spool prior to reassembly.
Incorrect reassembly can cause fi re or electric shock.
Set aside parts for later reassembly.
Incorrect reassembly may result in a risk of fire.
This will save you time at reassembly.
Incorrect reassembly may result in a risk of electric.
See also
Allow the parts to dry before reassembly.
Reassembly is in the reverse order of the disassembly.
Thoroughly dry broiler before reassembly of unit.
Needed for reassembly of the original packet.
Follow this procedure in reverse for reassembly.
Reassembly of the core is conducted in reverse fashion.
Periodically check all parts before reassembly.
Reassembly can be determined by restoration of binding activity.
Dry all parts well before reassembly.
Improper cleaning or reassembly can cause gas leakage.
Remember to dry the filter before reassembly.
Incorrect reassembly can cause a risk of electric shock.
Take the minister to the reassembly point.
Reassembly the other details properly.
It also simplifies disassembly and reassembly operations.
Incorrect reassembly may result in malfunction or total failure.
Check all components before reassembly.
Incorrect reassembly may result in an electric shock or fire.
Clean and lubricate the shaft before reassembly.
Incorrect reassembly can cause an electrical shock hazard.
Note the orientation for reassembly.
Incorrect reassembly may result in shock or fire hazard.
The brushcutter is only to be used after complete reassembly.
Incorrect reassembly can be very dangerous and armful.
Special tools are required for reassembly and calibration.
Reassembly the new brush following the above.
Dismantling and reassembly at a new location.
Reassembly without tools is accomplished in minutes.
These are subject to reassembly at the receiver.
His reassembly also had issues.
Check that the filter is dry before reassembly.
Disassembly and reassembly of the handgun is relatively simple.
Reverse the above procedures for reassembly and.
Maybe reassembly can only happen in the afterlife.
Ensure all parts are completely dry before reassembly.
