Examples of 'receiver has' in a sentence
Meaning of "receiver has"
The phrase 'receiver has' indicates possession or ownership of something by the person or entity referred to as the receiver. It suggests that the mentioned individual or entity has obtained, acquired, or has been given something, which may include physical objects, information, rights, or responsibilities
How to use "receiver has" in a sentence
Basic
Advanced
receiver has
The receiver has a video conversion function.
Check that outlet on receiver has power.
If the receiver has been connected to the fol.
The cover of the transmitter or receiver has.
The receiver has two modes of operation.
Your warranty will be void if the receiver has been opened.
Our colour receiver has been delayed again.
Consideration is given below to an example in which a receiver has two antennas.
The receiver has an automatic shutoff function.
It is sent to ensure that the receiver has received the frame correctly.
This receiver has in practice a double role.
Does not display any message on the front panel or receiver has no power.
The receiver has corresponding decoding means.
Note the blue barrel indicating the upper receiver has been modified.
No realisable receiver has infinite image rejection.
See also
This estimation phase is performed once the synchronization of the receiver has been acquired.
The receiver has discarded the frame.
The suitable crystal for the receiver has to be marked with the same.
The receiver has a split rear bridge.
If was the chosen property the receiver has to be lifted and then replaced.
The receiver has to be wired to your network.
The sender is never certain that the receiver has received the entire message.
The receiver has no gain control.
Identify all entries where the correct receiver has received its designated packet.
That receiver has never picked up coded transmissions.
The second sad thing is that the receiver has been drilled and tapped.
This receiver has been designed to reproduce.
All other channels have no output until the receiver has linked to the transmitter.
The receiver has two alternating relay contacts.
A blind estimation means that the receiver has no a priori knowledge of these parameters.
The receiver has been disconnected for a long period.
Appropriate input source and the mute button on the receiver has not been pressed.
The corresponding receiver has been designed and tested.
Receiver has determined its position.
Check whether the receiver has received the alarm.
Receiver has lost satellite signal.
Make sure that the receiver has a fully charged battery.
A receiver has a decoder that decodes encoded data the receiver has received.
Indicates whether the receiver has found enough satellites to work.
This detection phase is carried out once the synchronization of the receiver has been acquired.
The receiver has to be in the overlap.
Only a part of the refrigerant passing the drier receiver has to pass the charge.
The wireless receiver has an internal memory function.
This merely implies that a synchronisation process in the receiver has already removed this delay.
The receiver has a recharging function.
The response indicates whether or not the receiver has the facilities to receive the file.
The receiver has its own internal clock.
The advantage is you will know whether the receiver has read the message or not.
A receiver has a list of valid keys.
A wide receiver has.
You'll also be interested in:
Examples of using Receiver
Show more
Occupiers refuse receiver entry into shipyard
Receiver unit is outside the maximum range
Make sure that the receiver is turned on
Examples of using Has
Show more
She has the baby with her
The incarceration system has been described as follows
It has signed or ratified the following instruments
