Examples of 'receiver section' in a sentence
Meaning of "receiver section"
receiver section: a part of a device or system that is designed to receive signals, information, or input
How to use "receiver section" in a sentence
Basic
Advanced
receiver section
The receiver section does exactly the opposite to the transmitter.
Volume control for the output signal of the receiver section.
The receiver section and the transmitter are synchronized by radio transmission.
Such sampling is incorporated to increase the noise immunity of the receiver section.
The receiver section and the transmitter are syn chronized by radio transmission.
Fre Pair of external photocells receiver section.
The other settings of the receiver section are described in the following chapters.
Fri Pair of internal photocells with CF posts receiver section.
Set the receiver section and the transmitter to the same transmission channel.
Button SYNC to synchronize the receiver section and the transmitter.
From the receiver section and the number of blinks of the operation lamp.
Is coupled with a receiver section FIG.
The command receiver section is configured to receive a command from the management apparatus.
LCD Indicates all functions of the receiver section Display.
Set the receiver section and the transmit ter to the same transmission channel.
See also
Set the transmission channel on the receiver section chapter 7.
The notification receiver section is configured to receive a notification from each of the equipment apparatuses.
Thus, the transmitter is set to the transmission channel of the receiver section.
The operation of receiver section 2 is identical.
As stated previously, each transceiver includes a driver section and a receiver section.
The receiver section of the modem also includes a tunable radio frequency filter 34.
The amplification stages included in the receiver section of locator 30 have adjustable gains.
Thus, the transmitter is set to the trans mission channel of the receiver section.
In both cases, a DC voltage is applied to a receiver section through a voltage stabilizer.
Figure 6 is a block diagram of one embodiment for the hardware of the receiver section.
In the mode SCAN, the receiver section will automatically find the next free channel.
For more information on setting the failsafe, refer to the Binding a Receiver section above.
The signal of the receiver section is present at the corresponding outputs AUDIO OUT 10.
Fig . 5 shows a detailed view of an inventive receiver section.
As shown, the output of the locator receiver section is fed back to microcontroller 54.
Use the volume control ( 6 ) to adjust the output level of the receiver section.
Figure 2 is a block diagram of a receiver section of an interfaz unit ;.
The transmitter receiver system generally comprises a transmitter section 60 and a receiver section 70.
The receiver 1 generally comprises an analogue receiver section 2 connected to a signal processing section 4.
FIG . 10 is a side face explanatory diagram of the spitting receiver section.
The AM receiver section may use the conventional 465kHz intermediate frequency.
D indication “ SYNC ” for synchronizing the receiver section and the transmitter.
The receiver section is a superheterodyne design with a single frequency conversion, consisting of 8 identical 2K2M valves.
Make the settings one after the other for each receiver section RECEIVER 1 - 4.
Figure 4 A shows a receiver section used in the switch of Figure 3 ;.
Rear sight assembly 50 is provided and mounted to upper receiver section 34.
The receiver section includes a test point 46 at the output of limiter circuit 42.
These instructions only describe receiver section 1 RECEIVER 1.
The spitting receiver section will be explained with reference to FIGs . 9 and 10.
A frequency synthesizer 18 provides local oscillator inputs to transmitter section 10 and to receiver section 14.
Receiver section 34 includes an antenna 40 for receiving the activation signal emitted by wire loop 16.
The filtered signal from the receive filter 24 is fed to the receiver section 22.
The picked-up RF signal is supplied to a receiver section 20 through an antenna duplexer 12.
The receiver section 14 receives RF signals from the network through line 16.
Use the buttons SET, and ( 5 ) on the receiver section to make the settings.
You'll also be interested in:
Examples of using Receiver
Show more
Occupiers refuse receiver entry into shipyard
Receiver unit is outside the maximum range
Make sure that the receiver is turned on
Examples of using Section
Show more
See following section on who is eligible to run
You will find it in the adult section
The section contains the following provisions
