Examples of 'recovered product' in a sentence
Meaning of "recovered product"
recovered product - This phrase refers to an item or material that has been salvaged or restored from a previous state of damage, loss, or disuse. It typically denotes a resource that has been reprocessed or repurposed
How to use "recovered product" in a sentence
Basic
Advanced
recovered product
Recovered product does not need to be handled by operators.
Many brines contain more than one recovered product.
The recovered product is dissolved in methylene chloride.
Finely ground waste in powder form yields a powdered recovered product.
The recovered product was essentially free of residual solvent.
This suggests that increased yield maintains shorter fibers in the recovered product.
The recovered product can be reslurried by conventional means.
After drying, a milling step may then be performed on the recovered product.
The recovered product is analysed.
A further increase to 10mM had a detrimental effect on the yield of recovered product.
The recovered product was used as such in the successive step c.
Pre-treatment presents a major disadvantage in final recovered product water quality.
The purity of the recovered product is of the heat stable grade.
After drying, a milling step may then be carried out on the recovered product.
Changes in size or amount of recovered product are indicative of mutations in the patient.
See also
After the drying operation, a step of grinding can be carried out on the recovered product.
The recovered product was washed with water and dissolved in ethyl acetate.
Process according to Claim 7, characterized in that the recovered product is crystallized by ethyl acetate.
The recovered product was then repurified using reversed phase chromatographic methods.
After 216 hours of heating the crystallinity of the recovered product increased.
The recovered product may be purified by chromatography or recrystallization from a suitable solvent if necessary.
Removing volatile components under reduced pressure gives 0.47 grams of recovered product.
The recovered product from the second ethanol washing is then fed to a screw press.
Removing volatile components from the isolated solids under reduced pressure gives 0.45 g of recovered product.
The recovered product may be further dried under vacuum and ground to homogenous size.
The sulfate contamination in the recovered product is illustrated in Figure 19.
The recovered product was added then to a PCR reaction.
A nuclear magnetic resonance ( NMR ) spectrum showed the recovered product to have a structure consistent with 3-methylbenzophenone.
The recovered product was not esterified as shown by FTIR.
The purity of the recovered product is above 99 %.
The recovered product is a solid which is difficult to transport, store, and use.
The melting point of the recovered product was measured to be 132°C.
The recovered product is recovered by centrifugation and filtration, followed by washing with de-ionized water.
Accordingly, the recovered product is both desulfurized and cracked.
The recovered product is a granular bimodal polyethylene product, also named particulate bimodal polyethylene product.
After jet-milling, the recovered product is placed in a tray as a thin layer.
The recovered product was used in Step 2 without further purification.
The properties of the recovered product ( Si-CHT-BR ) are shown in Table I.
Recovered product was dried under vacuum to yield 0.78 g of a gold-colored powder.
Incorporating the recovered product into a food product, cosmetic or pharmaceutical.
A recovered product is analyzed by SAXS at three different temperatures as shown in Figure 16.
Then feed the recovered product into the tank, and agitate for about 30 minutes.
The recovered product was purified by CombiFlash ® Rf followed by recrystallization from ether ether.
The mass of the recovered product corresponded to 36 % of the unrefined Cleve acid used.
The recovered product weighed 38 g and was analyzed by gas chromatography.
The recovered product was stored at 4 ° C until used, and injected within 6 hours after labeling.
The recovered product was washed several times with dichloromethane and dried under vacuum at 40°C.
The recovered product has Rf slightly lower than the starting compound AD32.
The 64 g of recovered product was redissolved hot in 225 cc of absolute ethanol.
The recovered product weighed 30.1 g and was analyzed using gas chromatography.
You'll also be interested in:
Examples of using Recovered
Show more
I have not recovered the gun yet
Recovered sufficiently to leave hospital in two hours
His kayak was recovered by the coast guard
Examples of using Product
Show more
We certify that the product indicated hereafter
Product serial number displayed on the product
This report is the product of a wide collaboration
