Examples of 'recovery efficiency' in a sentence
Meaning of "recovery efficiency"
recovery efficiency: the measure of how effectively or well something, such as a system or process, can return to its original state or function after a disruption
How to use "recovery efficiency" in a sentence
Basic
Advanced
recovery efficiency
This further improves chip recovery efficiency.
A higher recovery efficiency is indicative of a smaller nitrogen footprint.
This curve is central in the evaluation of oil recovery efficiency.
Limited recovery efficiency can be achieved on rotary coolers.
Distillation effects give an important contribution to the recovery efficiency.
Recovery efficiency in these units was also not as high as desired.
This allowed important data analysis and an increase in recovery efficiency.
Heat recovery efficiency.
In some systems this may hamper the water recovery efficiency.
The recovery efficiency was independant of either virus concentration or water quality.
Oil spill thickness has a significant effect on the recovery efficiency.
The recovery efficiency depends on the achievement of both of these goals.
Drum rotation speed had a significant effect on the recovery efficiency.
The recovery efficiency of the virus in the retentate varied by fluid type.
Allowed to save files while scanning to enhance data recovery efficiency.
See also
Improving the recovery efficiency of coalbed methane production from unmined coal seams.
The effect of each design or operational variable on oil recovery efficiency was evaluated.
The recovery efficiency of the combined immunomagnetic separation and staining steps was also determined.
This causes a loss of fresh water and reduces the recovery efficiency.
Can be further delineated to specify recovery efficiency of methane drainage systems and ventilation systems.
Use of the most oleophilic material reasonably available is preferred to enhance recovery efficiency.
The heat recovery efficiency is directly proportional to the energy efficiency of the dryer section.
We also found that the filter bag gave longer life in addition to recovery efficiency.
The issue of increasing the recovery efficiency of the storage becomes an important economical question.
Table 6 shows the equilibrium concentrations of catalyst showing a high recovery efficiency.
This significantly improves the recovery efficiency for product having the ultimately desired particle size distribution.
Fig . 3 contains an example curve illustrating the increase of the recovery efficiency parameter.
B Calculated using the recovery efficiency and the tonnage per unit area.
Similarly, the generated slag can be recovered as a valuable resource, improving the recovery efficiency.
The solid recovery efficiency thereof is such that,.
This leads to formation of much thinner oil film and, hence, lower recovery efficiency.
The recovery efficiency was tested 3 times.
However, this improved process does not yet provide a satisfactory recovery efficiency of the target peptide.
The recovery efficiency was tested 3 times at each oocyst concentration.
The equipment must have a heat recovery efficiency of greater than or equal to 42.
High recovery efficiency and acceptable emission from tower top ;.
Optionally, one or more Claus reactors may be added to further increase sulfur recovery efficiency.
However, the heat recovery efficiency of the system was high.
When the H2S volume percentage is too high, the overall recovery efficiency will also decrease.
Originally, the sulphur recovery efficiency was relatively low as compared to modern standards.
In other words distillation effects give an important contribution to the recovery efficiency ( 4 ).
In this sense, higher recovery efficiency will also mean lower cost.
Recovery efficiency - how efficiently the heat from the energy source is transferred to the water.
For a standard powder the recovery efficiency can be as high as 95 %.
The recovery efficiency of the centrifuge was tested 3 to 5 times at each oocyst concentration.
They are very specific and extremely efficient - energy recovery efficiency can reach 95.
The recovery efficiency parameter is plotted versus the number of injection-extraction cycles.
The selection of the recovery surface material can increase the recovery efficiency by 20 %.
The recovery efficiency parameter increases with the number of injection-extraction cycles.
After manual schedule calibration and automated heat recovery efficiency calibration, the mean bias error was 7.1 %.
You'll also be interested in:
Examples of using Recovery
Show more
Recovery in employment lagged behind output recovery
Future improved recovery has two components
Recovery was readily affected by discontinuation of isoflurane administration
Examples of using Efficiency
Show more
Improve the energy efficiency of a shopping centre
Efficiency and emissions requirements of combustion equipment
Liberalisation enhances efficiency of local insurance market
