Examples of 'recovery tank' in a sentence
Meaning of "recovery tank"
A recovery tank is a container or reservoir used in various contexts to store or collect substances or materials during a process of recovery, such as in the fields of industrial, chemical, or environmental applications. It is designed to separate and hold recovered substances for further use, treatment, or disposal
How to use "recovery tank" in a sentence
Basic
Advanced
recovery tank
Clean recovery tank after each use.
Disconnect vacuum hose from recovery tank.
Recovery tank and solution tank emptying.
Check that the recovery tank is empty.
Recovery tank inlet loose or gasket defective.
Make sure the recovery tank is empty.
Recovery tank cover not seated properly.
Lower handle and replace recovery tank.
Open the recovery tank dome lid.
The nozzle is secured to the recovery tank.
Hinge open recovery tank to access batteries.
Use a hose to rinse out recovery tank.
Drain recovery tank prior to accessing batteries.
Located on the recovery tank cover.
Recovery tank lid not on correctly.
See also
Periodically observe recovery tank for excessive foam.
Recovery tank cover gasket damaged.
Manually remove the recovery tank and empty it.
Recovery tank cover gasket leak replace gasket.
Empty and rinse out recovery tank thoroughly.
Remove recovery tank lid to promote air circulation.
Lift and rotate recovery tank.
Flush out recovery tank with clean water.
Inlet is located at bottom of recovery tank.
Hinge open recovery tank to access battery compartment.
Raise and tilt recovery tank.
Remove recovery tank dome to promote air circulation.
Take off the recovery tank.
Open recovery tank cover to promote air circulation.
Remove and empty recovery tank.
Be sure the recovery tank is empty before lifting.
Check for excessive foam in the recovery tank.
Empty the recovery tank into a suitable drain.
Watch the water fl ow into the recovery tank.
Make sure the recovery tank lid is on correctly.
Check for excessive foam buildup in recovery tank.
Recovery tank cover is not in place.
Reinstall recovery tank and dome.
Recovery tank inlet hole is obstructed.
Also inspect the recovery tank cover gasket.
Recovery tank lid is not seated or gasket is damaged.
Make sure the recovery tank cover is in place.
Recovery tank is full and ball float has been activated.
Open flexible water recovery tank.
Empty the recovery tank and continue cleaning.
Place the access lid back on the recovery tank.
The recovery tank is full and must be emptied.
Unlatch back part of recovery tank and remove lid.
A recovery tank is selectively mounted on the base assembly.
Be sure the solution tank and recovery tank are empty.
You'll also be interested in:
Examples of using Recovery
Show more
Recovery in employment lagged behind output recovery
Future improved recovery has two components
Recovery was readily affected by discontinuation of isoflurane administration
Examples of using Tank
Show more
Salt storage tank salt not shown
The tank assembly consists of the following
Remove the water tank and fill it up
