Examples of 'red leds' in a sentence
Meaning of "red leds"
Red LEDs refers to light-emitting diodes that emit red light, which is often used in electronic devices, signs, or indicators for various purposes such as notifications or visual displays
How to use "red leds" in a sentence
Basic
Advanced
red leds
Red LEDs indicate iron target nail.
The yellow and red LEDs are lit.
The red LEDs flash four times.
The green and red LEDs stay on.
The red LEDs show the temperature set.
In case of overload the red LEDs light up.
Two red LEDs indicate a high level of charge.
The green and red LEDs both flash.
The red LEDs next to the button blink.
Warm white and red LEDs for lighting.
The red LEDs display the set temperature.
The blue and red LEDs will begin.
Lighting includes warm white and red LEDs.
The two red LEDs will start flashing.
Rebuilt lighting with white and red LEDs.
See also
Blue and red LEDs light up.
Red LEDs can show a possible converter input saturation.
There are two red LEDs for general use.
The following are red LEDs.
The red LEDs on the remote control start to flash.
The green and red LEDs are.
Two red LEDs illuminate when amplifi er is in protect mode.
Under no circumstances may the red LEDs illuminate continuously.
The red LEDs above the buttons do not light up.
The level display will indicate overload by the red LEDs.
The blue and red LEDs will begin to flash.
Red LEDs displays mean that there is a fault in operation or a possible error.
Warm white and red LEDs are using for the lighting.
Overloads are indicated via the level display by lighting of the red LEDs.
Early red LEDs were notable for their short lifetime.
The battery level is shown via the yellow and red LEDs.
The red LEDs and tail light indicate the back.
An incoming call is indicated by a ringtone and the green and red LEDs flashing on.
The red LEDs flash and all the buttons are locked.
Each side of the warning display has six yellow and two red LEDs.
The green and red LEDs of the remote control light up.
When switching the operating mode all outputs will automatically be muted red LEDs light up.
The green and red LEDs of the remote control turn on.
The calibration is complete when both Green and Red LEDs glow solid.
The blue and red LEDs approach their theoretical limits.
Now use the UP and DOWN buttons to set the brightness of the red LEDs.
The green and red LEDs in the signalling block must light.
Turns off all LED output Red Red LEDs at full.
The four red LEDs above the buttons display the following information.
Available with smoke or clear lens with red LEDs or red lens with clear LEDs.
Red LEDs are used for dim light application and do not indicate a hazardous status.
Look to see which of the red LEDs is flashing to identify the problem.
The red LEDs CLIP of the level indicator will light up to indicate an overload.
In case of overdriving the red LEDs of VU meter light up.
The flashing red LEDs represent the amplifier modules with a short circuit fault.
