Examples of 'reduce the thickness' in a sentence
Meaning of "reduce the thickness"
Reduce the thickness: To decrease the width or diameter of something, typically used in a physical context like materials or objects
How to use "reduce the thickness" in a sentence
Basic
Advanced
reduce the thickness
A planer can be used to reduce the thickness.
One approach to reduce the thickness of the subsurface layer is the application of lubricant.
It seems difficult at present to reduce the thickness further.
To reduce the thickness of insulation ; and.
Laser treatments to reduce the thickness of the skin.
These processes tend to compact the dome regions of the paper and reduce the thickness.
Grooming to reduce the thickness of clumps.
Another avenue film manufacturers are exploring is to reduce the thickness of their film.
A cutting operation to reduce the thickness of the workpiece to make thinner pieces.
The means of limiting the degradation is to reduce the thickness of the cell.
This arrangement allows to reduce the thickness of the fastening member while maintaining good stiffness.
The abrasion stages make it possible to progressively reduce the thickness of the wafer.
This texturing will reduce the thickness of the coating on the particle.
On the other hand, wear at the contact surface will reduce the thickness.
Its objective is to reduce the thickness of the product input.
See also
Consequently, tensioning of the preform can also significantly reduce the thickness of the preform.
This makes it possible to reduce the thickness of the cutter in the axial direction.
Reduce the thickness of this hinge without pulling out the bar, until the tree falls.
It has been sought to further reduce the thickness of the movement.
To reduce the thickness of a smoothie, use the Pulse setting.
It is also possible to reduce the thickness of the running strip.
This combination helps to dissolve hair and reduce the thickness of the hair.
The indents 151a reduce the thickness of the plastic to conserve materials.
This third implementation of the invention serves to reduce the thickness of the electronic module.
Attempts to reduce the thickness by " drawing " the sheet, merely further reduce the sheet width.
Attempts have therefore been made to reduce the thickness of the panel.
The walls cooled in this way reduce the thickness of the refractory material layer needed.
The presence of said reinforcement on the bottoms 3, 4 allows to reduce the thickness of bottoms 3, 4.
It is therefore necessary to reduce the thickness of the strip to allow heat transfer.
For this reason, it is not preferable to reduce the thickness t ₁ too much.
This makes it possible to reduce the thickness of the decoupling portion.
The conductive fluid was diluted 1:1 with acetone to reduce the thickness of the coatings.
It is preferred to reduce the thickness at central edge regions 125.
This is advantageous if it is desirable to reduce the thickness of the delivery device.
Provision may thus be made to reduce the thickness of the board in a peripheral area.
These trends are leading manufacturers to reduce the thickness of the seating foams.
An alternative approach would be to reduce the thickness of the optical fibre cable sheath.
Juxtaposed cams can however also be used to reduce the thickness of the superposition.
RESAW - A cutting operation to reduce the thickness of the workpiece to make thinner workpiece.
Improving the mixing of combustion and air can reduce the thickness of the flame surface.
Thus, it is possible to reduce the thickness of the upper wall portion ( 12 ).
Fig . 7D shows a mandrel and shims used to reduce the thickness of a laminate ;.
This can make it difficult to reduce the thickness or size of a multilayer ceramic part.
The diffractive surface adds power to reduce the thickness and weight of the lens.
Consequently, can makers strive to reduce the thickness of the can end without sacrificing strength.
Therefore, it is beneficial to reduce the thickness of the cavity.
Finally, it could be contemplated to reduce the thickness of the insulating resin of encapsulation 26.
Step E1, a second thinning is performed so as to reduce the thickness e b of the solder balls 4.
This makes it possible to reduce the thickness of the outer sheath 7.
An attempt has been made to simply reduce the thickness of the overall sprocket.
You'll also be interested in:
Examples of using Reduce
Show more
To reduce the risk whilst diversifying livelihoods
Error code messages reduce troubleshooting time
To reduce the risk of injury when grinding
Examples of using Thickness
Show more
Minimum recommended thickness of zinc vs thickness of steel
Thickness of tanks made with double walls
Reduction of wall thickness and additional protection
