Examples of 'reference plane' in a sentence
Meaning of "reference plane"
Reference plane: Refers to a specific framework or system used as a standard or point of comparison in a particular context. It serves as a baseline or coordinate system that allows for accurate measurements, calculations, or assessments in fields such as engineering, mathematics, and physics
How to use "reference plane" in a sentence
Basic
Advanced
reference plane
It is intended for use as an internal reference plane.
Apply a horizontal reference plane to restore an initial state.
It is intended for use as an external reference plane.
The reference plane may be vertical.
Area view along torso reference plane.
The reference plane will generally run horizontally.
The lower beam is considered as a reference plane.
Each part defines a reference plane comprising flanges.
An insertion slot is situated in the reference plane.
The reference plane is defined by three ramps inside surface.
They are all situated in the reference plane.
The reference plane is horizontal.
One of these two planes is a reference plane.
The reference plane is vertical.
Cars have to be symmetrical to a vertically oriented reference plane.
See also
Torso line reference plane.
The variations in height are in a direction generally perpendicular to a reference plane.
Intersection of torso line reference plane and floor pan.
The reference plane is defined by the three ramp inside surface.
Restore the original reference plane.
The longitudinal reference plane defined in this manner is theoretically vertical.
Latitude is defined as an equatorial reference plane.
Mm from reference plane.
One daughter vessel is taken as the distal reference plane.
Change the reference plane.
The backside of the measuring tool is used as the reference plane.
Auxiliary reference plane.
The filament position to the reference axis and reference plane.
Celestial reference plane.
The camera position is constrained to the height of the reference plane.
Working reference plane.
The positions of points are then calculated relative to the reference plane.
Vertical reference plane.
Wavefront slopes are calculated at each measurement point in the reference plane.
X mm to reference plane.
A guide means guides the card in translation along the reference plane.
Inclination the angle between a reference plane and another plane or axis.
How this reference plane interacts with the heated platen is as follows.
Examination of the reference plane.
The reference plane is located approximately equidistant between the drive coils.
Distance e from reference plane.
It can be seen that with such a device it is possible to materialize a reference plane.
Proper laser beam focus at the reference plane is thus maintained thereat.
The body being at least partially symmetrical about the said reference plane.
No part of the cap beyond the reference plane shall interfere with angle.
Linking the images by connecting branches located within the reference plane.
The reference plane is perpendicular to the active axis of the current coordinates systems.
The top substrate may include a ground reference plane or electrode.
The reference plane formed by the underside of the three radiused tabs of the cap.
Using external geometry feature and using a reference plane to centre a hole.
You'll also be interested in:
Examples of using Reference
Show more
Components of terms of reference covered by the review
Unique reference identifying a particular consignment of goods
This listing is for reference purposes only
Examples of using Plane
Show more
I want a plane with five hours of fuel
You guys are supposed to be on the plane now
There is a big plane of tuna right here
