Examples of 'reference speed' in a sentence
Meaning of "reference speed"
reference speed: Reference speed is a term used to describe the designated or recommended speed at which a particular process or action should be carried out
How to use "reference speed" in a sentence
Basic
Advanced
reference speed
Total friction loss at the reference speed.
The final reference speed is zero.
Running resistance force at the reference speed.
Vref landing reference speed degrees.
It may however be desirable to regulate the reference speed.
The reference speed shall be determined by the following formula.
This determines the reference speed.
The reference speed shall be determined by the following definition.
Target running resistance force at reference speed on chassis dynamometer.
The ideal reference speed is supplied by the quartz oscillator.
Comparing this measured speed of rotation with a reference speed.
This reference speed of rotation is determined for a given application.
Braking force of the power absorbing unit at the reference speed.
Nref reference speed.
Comparing the measured speed of rotation with a reference speed of rotation.
See also
The reference speed may be set in the download application in advance.
The reference position θs corresponds to the integral of the reference speed ws.
Set running resistance force at the reference speed on the chassis dynamometer.
The reference speed generator being further connected to the throttle and including.
Mean coast down time on the chassis dynamometer at the reference speed.
The final result of a reference speed is obtained from a linear regression analysis.
Detecting the car speed and comparing it with a reference speed value.
Reference speed Vref used to determine the final result will be.
And at least four measurements at test speeds higher than the reference speed.
The front wheel speeds are used as the reference speed for a number of reasons.
Under ideal conditions the wheel speeds should be controlled to the reference speed.
The reference speed Vref for the determination of the final result shall be.
Determine the average torque from these six measurements for the reference speed.
The Thermal Reference Speed values assume the bearing has been sufficiently broken in.
The real speed of rotation is continuously measured then compared with a reference speed of rotation.
A reference speed of displacement members is selected ;.
Dial speed indicator with two pointers indicating an actual speed and a reference speed.
The preset reference speed is an idling speed, for example.
The Kalman filter is used for a state vector x which represents the merged reference speed Vref.
Approach speed - landing reference speed in dte normal landing configuration.
Given the following values, reference speed.
The calculated reference speed data is displayed on the monitor portion 8.
Total friction loss at the reference speed F j.
As a result, a reference speed is determined in relation to the number of pulses counted.
Where Vref is the reference speed.
This reference speed is preferably equal to the reference pivoting speed wc of wheel set 3.
EPMATHMARKEREP is the reference speed.
First generating a reference speed signal less than the idle speed ;.
Moreover, significant backhaul deployments may be needed regardless of the reference speed.
The asterisk * indicates the reference speed in the table.
The parameters n e w 0 are auxiliary, where the first is dimensionless and second a reference speed.
Calculating and tracking a reference speed of rotation for the main rotor ;.
In the preferred embodiment this predetermined amount is 4 % of the reference speed signal.
Then, there is the generation of a reference speed obtained integrating the reference curves.
The value of surface is used to control the operation of the reference speed selector 7.
You'll also be interested in:
Examples of using Reference
Show more
Components of terms of reference covered by the review
Unique reference identifying a particular consignment of goods
This listing is for reference purposes only
Examples of using Speed
Show more
The speed of the vacuum source shall be
I must have hit speed dial by mistake
Zoom speed is determined by the amount of rotation
