Examples of 'relative thickness' in a sentence
Meaning of "relative thickness"
Relative thickness: Refers to the comparison of thickness between different objects or materials
How to use "relative thickness" in a sentence
Basic
Advanced
relative thickness
Are its relative thickness and its composition.
Research has shown a direct correlation between the relative thickness of the ridges and valleys.
This relative thickness range enables the enclosure to retain a satisfactory elasticity.
This allows control of relative thickness of both layers.
The relative thickness may also evolve from the root to the blade end.
Differences were also noticed in the relative thickness of the gelatinous layer.
Sets the relative thickness of the color bands that make up the grain.
Where monofilaments are used, the blockage occurs because of the relative thickness of the yarns.
Change in relative thickness of profiles.
According to yet another advantageous embodiment, the first base part has a constant relative thickness.
Notice the relative thickness of the five lines running from INPUT to OUTPUT.
The above indicated profiles form particular points of the relative thickness law shown in FIG . 7.
The change in relative thickness of the profiles ;.
The armour was angled to up to 25 degrees on the belt, to increase relative thickness.
Ratio of dimensions and relative thickness of the resonator ;.
See also
The relative thickness of the coolant-film gap is here exaggerated for clarity of illustration.
Table 1 shows the results ( including the relative thickness of each material ).
The relative thickness of the 2 polyester layers forming the polyester film base can vary broadly.
Furthermore, it is advantageous for this maximum relative thickness to be at least 12 %.
It physically relates the relative thickness of the hydrodynamic layer and mass-transfer boundary layer.
When ratio a is above 0.7, a variation in width is unimportant, as the relative thickness is small.
Decitex and denier relative thickness of a yam, a linear density.
Table II HOR 07 below relates to a profile with relative thickness of 7 %.
E/1 is the maximum relative thickness of the section, and.
The table IV HOR 20 is relative to a profile with a relative thickness of 20 %.
This corresponds to a relative thickness of the surface layer from 1 to 10 %.
The table III HOR 12 is relative to a profile with a relative thickness of 12 %.
The relative thickness of the intermediate sheet 150 is exaggerated in Figures 3 and 4 for clarity.
Figure 6 is an illustration of the relative thickness of the vane 78 and the slots 90.
A similar study was made of a transformable blade having a relative thickness of 30 % for the outer 32 meters.
This maximum relative thickness E max is at least 12 %.
You'll also be interested in:
Examples of using Relative
Show more
Women were relative newcomers to the work force
Here they will mate in relative safety
Relative productivity in manufacturing output per hour
Examples of using Thickness
Show more
Minimum recommended thickness of zinc vs thickness of steel
Thickness of tanks made with double walls
Reduction of wall thickness and additional protection
