Examples of 'relative to the horizontal' in a sentence
Meaning of "relative to the horizontal"
relative to the horizontal: Describes a position or direction in relation to the horizon or a level surface
How to use "relative to the horizontal" in a sentence
Basic
Advanced
relative to the horizontal
The slide is tilted relative to the horizontal.
The telescopic support devices may have a second slideway that is inclined relative to the horizontal.
The direction of the incoming wave relative to the horizontal plane may be measured also.
In such a case the conveyor must be placed with a shallow angle relative to the horizontal.
The degree of its defection relative to the horizontal is depicted by arrow B.
Where is the initial speed and is the initial angle relative to the horizontal.
Their horizontality relative to the horizontal axis of the boxing-system boxes ; and.
The sheets were then inclined at increasing angles relative to the horizontal.
Each beam 32 is inclined relative to the horizontal from back to front.
The short intersectant ribs may be arranged horizontally or slanted relative to the horizontal line.
The elevation angle s is defined relative to the horizontal 5 corresponding to the elevation angle s=0 °.
The container and the vehicle can have a different position relative to the horizontal.
In contrast the symmetry relative to the horizontal mid-place is less strict than in FIG . 3.
The web thus becomes particularly easily movable relative to the horizontal core.
The junction plane 34 is inclined relative to the horizontal at an angle a essentially equal to 45 °.
See also
In particular, the longitudinal axis can be inclined relative to the horizontal.
That is, it is angled relative to the horizontal.
The video camera films the wearer with a certain non-zero angle alpha relative to the horizontal.
The shaker is set a shallow angle relative to the horizontal level plane.
The drying rack is oriented at an angle of 45 degrees relative to the horizontal.
By convention, the angles are expressed relative to the horizontal axis of the image 2.
Comfortable observation may correspond to an angle of about 15 ° relative to the horizontal plane.
The inclination of the lighting system relative to the horizontal can be 3 ° for example.
Under these conditions, the support element 1 pivots by approximately 6 ° relative to the horizontal.
Means for inclining said drum relative to the horizontal plane ;.
The axis 170 can alternatively be tilted by a few degrees relative to the horizontal.
The middle axes ( turning axes ) lean relative to the horizontal direction.
In the preferred embodiment the shoulder 57 is sloped at approximately 30 ° relative to the horizontal.
The drying drum 2 is slightly inclined relative to the horizontal direction.
The cooling zone occupied by the boxes was 1 m relative to the horizontal.
Advantageously, the beam direction of the lights relative to the horizontal can be modified.
In Figure 4A, the third ramp section 62 is at an angle a relative to the horizontal plane.
The extruder 430 is preferably inclined relative to the horizontal at an angle a.
The patient is placed in dorsal decubitus at 30º relative to the horizontal plane.
Angles range from 25 to 45 degrees relative to the horizontal level plane.
On down gaze, the optical axis 220 rotates to an angle φ relative to the horizontal.
The vertical display is scaled by a factor of 2 relative to the horizontal scales.
The vertical dimension is exaggerated three-fold relative to the horizontal dimensions.
The element 4 can then tilt in all directions relative to the horizontal plane.
The link 26 is then more inclined relative to the horizontal.
Furthermore, these guide walls are stationary relative to the horizontal platen 14.
The wall comprises an opening 18 off-centred relative to the horizontal rotation axis.
The axis A is angled, as shown by angle B, relative to the horizontal.
The turbine is inclined at 45 ° relative to the horizontal.
The components ( 11 ) are inclined at a certain angle a relative to the horizontal.
This conveying passageway 13 is inclined 30 degrees relative to the horizontal.
The U-shaped components are inclined at 55 ° relative to the horizontal.
In the embodiment illustrated in FIG . 2, the base 3 is inclined relative to the horizontal plane 9.
You'll also be interested in:
Examples of using Relative
Show more
Women were relative newcomers to the work force
Here they will mate in relative safety
Relative productivity in manufacturing output per hour
Examples of using Horizontal
Show more
Store the machine in horizontal position to avoid
B horizontal flat jet for vertical surfaces
Place the banknotes horizontal on the hopper
