Examples of 'relay function' in a sentence
Meaning of "relay function"
Relay function refers to a process or mechanism where information, signals, or responsibilities are passed from one person or device to another in a sequential or interconnected manner. It involves the transfer or transmission of data or tasks between different entities to ensure effective communication or coordination
How to use "relay function" in a sentence
Basic
Advanced
relay function
Different settings of relay function can be selected.
Staircase maintenance combined with staircase relay function.
The default has no relay function when powered on.
Press the relay button to enable relay function.
The relay function will be continuing until you must to stop it.
Each of these units provides a specific relay function.
The overload relay function is time based and not instantaneous.
The port function is different from the relay function.
Is the device number for a lockout relay function in electrical engineering electrical circuit protection schemes.
Alternately a track will be played from both players until the relay function is.
Provide the floor control message relay function between PoC client and controlling PoC server.
Remove the relay cable if you do not want to use the relay function anymore.
Incorrect relay function selected Verify with simulation.
The diagnostic logic can also include relay function monitoring logic.
This local relay function effectively doubles the range of the IBSS.
See also
The latch function can be applied when the relay function setpoint or window is selected.
The MAU function is different than either the port function or the relay function.
The Full voltage relay function does not work.
Alternately a track will be played from both units until the relay function is disengaged.
Alice calls the BTC Relay function using the Bitcoin transaction and the BTCSwap contract address.
The management module may have a transmission relay function for the resulting network.
The relay function can be selected for increasing / decreasing or window.
The required function of the impulse switch with integrated relay function can then be selected.
By increas ing relay function the hysteresis is below the setpoint, by decreasing above.
On its left to enable the Relay function.
The relay function can be inverted, de-energized becomes energized and vice versa.
The AN supports the IIA relay function.
You can also use the relay function to make a preprogrammed sequence on the 2 decks.
The following describes this behaviour in detail, by relay function.
When the relay function is activem, the Single mode will be automatically active.
Figure 9 is a block diagram of the relay function monitoring logic.
In the SGSN, the relay function relays PDP-PDUs between the Gb and Gn interfaces.
However, as a general rule, a plurality of terminals can perform the relay function.
In other words, a network node generally has both a relay function in addition to a measurement function.
Press the RELAY button ( on the left or right player ) to enable the relay function.
NOTE, by switching on the relay function you automatically put both players in single mode.
The third diagnostic performed by the CIM 3 is relay function monitoring.
The relay function relays LLC-PDUs between the Um and Gb interfaces in the BSS.
The design of the low-orbit satellites is significantly simplified ( simplified relay function placed in orbit ).
Does the DHCP relay function work in the MPLS VPN network?
For details on the setting procedure, see About the relay function on page 19.
Activate the relay function on both units with the button RELAY ( 6 ) buttons illuminated.
See 3.7 for special treatment of these conditions in SMTP systems serving a relay function.
OFF, The relay function is disabled.
Press the button RELAY ( 9 ) on both players to activate the relay function buttons illuminated.
Staircase relay function ( compatible with 18 Series movement detectors ) Functions.
In another embodiment, the security server 22 is an applicative firewall that incorporates a DNS relay function.
Relay, This is the amplitude of the Relay function ( R ).
The mLAN8P is a “root.” ACTIVE Indicates the status of the relay function.
You'll also be interested in:
Examples of using Relay
Show more
The acoustic relay is picking up dozens of languages
A system driven by a contactor or a relay inductive load
And bong relay was his favorite sport
Examples of using Function
Show more
He could not function any other way
Function keys with preset multimedia actions
The desired function word will flash
