Examples of 'release the brake' in a sentence
Meaning of "release the brake"
release the brake - This phrase is used in the context of a machine or vehicle, indicating the action of disengaging or removing the brake to allow movement or progress
How to use "release the brake" in a sentence
Basic
Advanced
release the brake
Release the brake lever activated at start up.
Press and release the brake pedal.
Release the brake pedal and accelerate.
How to apply and release the brake.
To release the brake for wheel removal.
Within four seconds release the brake.
Do not release the brake handles.
Lift the brake pedal to release the brake.
You can release the brake pedal.
Pull the release lever to release the brake.
Then release the brake and accelerate gradually.
Tom forgot to release the brake.
To release the brake press the pedal upwards.
Start and release the brake.
Release the brake control handle to stop the engine.
See also
Make sure to release the brake.
Release the brake and get out of the car.
Three seconds after you release the brake.
Then release the brake again.
Push down on the other pedal to release the brake.
I will release the brake.
Press the brake lever again to release the brake.
Release the brake or accelerator.
This magnet or a separate electromagnet is used to release the brake.
Release the brake lines immediately to recover optimum flight speed.
Apply full throttle and then release the brake handle.
Release the brake pedal to allow the parking brake to engage.
The drive is also disengaged when you release the brake handle.
Release the brake.
It is therefore difficult to determine the appropriate time at which to release the brake.
Release the brake by pushing the shield upright once more.
Unplug the powercord and release the brake before moving the cabinet.
Release the brake and holding the clutch begins to accelerate.
Move the inhibitor to the right and then release the brake pedal.
Release the brake pedal and ensure that there is no vehicle movement.
The engine will stop as soon as you release the brake control handle.
Release the brake pedal and gently press the accelerator pedal.
The brakes will function as usual once you release the brake pedal.
Release the brake lines immediately to return to default glider air speed.
The engine will stop as soon as you release the brake control lever.
Release the brake control handle to stop the engine and blade.
Tighten the bleed screw and then release the brake lever or brake pedal.
Slowly release the brake pedal and drive away in a normal manner.
The engine restarts instantly when the driver begins to release the brake pedal.
Release the brake if the front wheels skid from hard braking.
Pull the OPC lever to release the brake on the engine.
Do not release the brake lines when half way through the maneuver.
Do not forget to shift the gear to the D and release the brake.
Release the brake control handle can stop the engine and blade.
Close the valve, then release the brake pedal.
You'll also be interested in:
Examples of using Release
Show more
Press again to release the hold state
Release buttons when the motor unit
Read the press release online here
Examples of using Brake
Show more
Manual release of brake via actuating handwheel
Brake lining or brake pad method of attachment
Outside of the brake drum or brake disc
