Examples of 'release the throttle' in a sentence
Meaning of "release the throttle"
This phrase is commonly used in aviation or automobile contexts. It refers to the action of reducing or completely removing the throttle, which controls the engine power or speed. Releasing the throttle often implies decreasing or stopping the acceleration.
How to use "release the throttle" in a sentence
Basic
Advanced
release the throttle
Release the throttle lever completely.
Then squeeze and release the throttle trigger to.
Release the throttle and recharge the battery.
If you slip or fall release the throttle lever immediately.
Release the throttle lever fully.
Hold the button down and release the throttle.
Release the throttle lever to stop the tool.
Pull the trigger lever again to release the throttle lock.
Then release the throttle lever by actuating it once.
The engine will idle when you release the throttle trigger.
Release the throttle lever to allow the engine to idle.
The blade must come to a halt as soon as you release the throttle safety catch.
Release the throttle control as soon as the cut is completed.
To make the scooter stop release the throttle and pull both brake levers carefully.
Release the throttle control and allow the engine.
See also
When it does, immediately release the throttle trigger.
Release the throttle lever to allow the engine idling.
When finishing sanding, release the throttle to stop the tool.
Release the throttle trigger and throttle trigger lock.
To stop the blade motion, simply release the throttle lever.
Release the throttle lever and run the engine for a.
When the brake operates and the chain is stopped, release the throttle lever.
Release the throttle lever while pushing the lock button.
When the brake operates, release the throttle lever to slow down the engine speed.
Release the throttle control and allow the engine to idle.
If the kickback brake is activated, release the throttle trigger and shut off the engine.
Release the throttle lever to let the engine run idle.
When the light illuminates, partially release the throttle pedal until the light goes out.
Release the throttle control to allow it to move back to the neutral position.
While holding down the throttle lock button, release the throttle trigger and throttle lockout.
Release the throttle control to the idle position and begin operation.
When the brake engages during operation, immediately release the throttle lever to stop the engine.
Immediately release the throttle and release the chain brake.
Push in the half throttle detent ( 2 ), and release the throttle lever.
Lightly squeeze and release the throttle control to idle the engine.
Release the throttle lever again to allow the engine to run at idle speed.
OPERATION Stopping the Engine Release the throttle trigger ( G ) and let the engine return to idle.
Release the throttle control and allow the engine to cool down by idling.
To slow down, release the throttle.
Release the throttle lever to run the engine idle and then squeeze the.
Pull the starter grip 3 to 5 times, and release the throttle control lever throttle trigger.
You can release the throttle stick and control the drone more easily.
To stop engine: - Release the throttle trigger.
Release the throttle and check that the cutting attachment stops and remains at a standstill.
To stop engine, release the throttle trigger and push the STOP switch.
Release the throttle trigger and check that the blades stop and remain stationary.
And, when you release the throttle trigger, the tines will stop.
Release the throttle control and check that the chain stops and remains stationary.
To stop the engine, - Release the throttle trigger ( 2 ) and allow the engine to.
Release the throttle lever and leave the engine running idle for thirty seconds.
You'll also be interested in:
Examples of using Release
Show more
Press again to release the hold state
Release buttons when the motor unit
Read the press release online here
Examples of using Throttle
Show more
Turn the throttle grip to reduce engine
The engine has a fixed throttle setting
Move throttle control to desired running position
