Examples of 'remote control must' in a sentence
Meaning of "remote control must"
Remote control must: Implies a requirement or necessity for a remote control to perform a specific action or function
How to use "remote control must" in a sentence
Basic
Advanced
remote control must
The remote control must always be connected.
A previously memorised and operational remote control must be available.
The remote control must not be dismantled.
The Lifestyle amplifier and its remote control must be set to the same room code.
The remote control must be programmed with supplied.
In order to run nlb . exe from a remote computer, remote control must be enabled.
The remote control must be kept in a dry place.
The switch position on remote control must be set to “ ON ”.
The remote control must be operational.
At first, the wireless remote control must be registered with the machine.
Remote control must be connected to the inverter with the original.
The unit and remote control must be placed at least 1 metre.
Remote control must be within 15 ft of insert.
Your SRL2 and the Remote Control must be paired together before use.
The remote control must be removed and the shorting plugs plugged in.
See also
Your SC10U and the Remote Control must be paired together before use.
The remote control must be enabled to control the device.
Please note, The remote control must be able to communicate freely with the receiver.
The remote control must never come into contact with water.
Power supply to the remote control must exclusively be a 3V/DC button cell battery type CR2025.
The remote control must not be exposed to spray or dripping water or abrasive liquids.
The new remote control must be set up as follows.
The remote control must be pointed in the direction of the sensor on the device.
Therefore, the remote control must be pointed directly at the equipment you want to operate.
The remote control must be attached to the steering wheel inside to prevent steering impairment.
The remote control must have a clear line of sight to the control panel.
The remote control must be directed at the DVD player.
The remote control must be connected to machine with a CAN cable.
The remote control must be in DVB mode in order to select the subtitles.
The remote control must be programmed with supplied codes to operate the VCR.
The remote control must be used within 8 meters of the unit.
The remote control must not be placed in the air-bag trigger range.
The remote control must charge for approximately 30 minutes before it will be functional.
The remote control must be previously synchronized with the camera, which communicates with the controller.
The remote control must have a direct line of sight to the unit, within 20 feet 8 meters.
The remote control must be set to the “ Heating ” operating mode.
The remote control must be powered with 2 x 1.5V micro batteries type AAA.
You'll also be interested in:
Examples of using Remote
Show more
Use of data from remote sensing satellites
For remote control and firmware upgrading
Transmitting distance of remote control is very short
Examples of using Must
Show more
They must have changed their view
Someone you know must have died
He must have loved you very much
