Examples of 'remote turn-on' in a sentence
Meaning of "remote turn-on"
remote turn-on: The action of activating a device or system from a distance, often using a remote control or a digital interface
How to use "remote turn-on" in a sentence
Basic
Advanced
remote turn-on
Connect to remote turn-on lead of source unit.
The head unit does not have a remote turn-on or.
Connect to remote turn-on lead of amplifier.
Check the amplifier to verify the amplifier has a power, ground and remote turn-on signal.
Connect the remote turn-on wire to the amplifier.
The fan rotates in connection with the Remote Turn-On lead.
Check remote turn-on at amplifier and repair as needed.
The head unit does not have a remote turn-on or power antenna lead.
Plug the plug into component you wish to use to activate the Remote Turn-On.
Connect this lead to the remote turn-on lead of your amplifier or signal processor.
The component remote control you are using to power the Remote turn-on has a dead battery.
Connect a Remote Turn-on wire from the source unit to the MTX THUNDER amplifier 's Remote terminal.
Connect the amplifier remote turn-on.
Connect a Remote Turn-on wire from your source unit to your MTX XTHUNDER amplifier 's Remote terminal.
Connect REM terminal to remote turn-on lead from source unit.
See also
Remote turn-on see next page.
Check the remote turn-on terminal.
Third, the last cable to connect is your remote turn-on REM.
Remote turn-on cable ( REM input on amplifier ) of adequate length and wire gauge.
These methods are useful when a conventional +12 V remote turn-on signal is not available in a system.
Connect a Remote Turn-On wire from the source unit to the MTX amplifier 's ( REM ) terminal.
Verify that there are 9 to 16 Volts present at the positive battery and remote turn-on cable.
Gauge, for the remote turn-on wire.
Remote” turn-on terminal becomes a remote turn-on output.
Routing rca interconnects, bass-level remote & remote turn-on lead.
This +12 V remote turn-on signal is typically controlled by a source unit 's remote turn-on wire.
Turn-on lead, typically controlled by the source unit 's remote turn-on output.
This allows for remote turn-on of other devices when the AMPSUB210 is powered on.
Verify there is 9 to 16 Volts present at the positive battery and remote turn-on cable.
Assignable 12V trigger outputs for remote turn-on of power amplifier ( s ) and other components.
Using a conventional +12V remote turnon lead, typically controlled by the source unit's remote turn-on output.
Set the switch to +12V to use the remote turn-on lead from your source unit.
In signal and DC sensing applications, the amplifier 's “ Remote ” turn-on terminal becomes a remote turn-on output.
You'll also be interested in:
Examples of using Turn-on
Show more
Connect to remote turn-on lead of source unit
A turn-on sequence is therefore either underway or completed
You are not as much of a turn-on as a submissive mistress
Examples of using Remote
Show more
Use of data from remote sensing satellites
For remote control and firmware upgrading
Transmitting distance of remote control is very short
