Examples of 'remove hose' in a sentence
Meaning of "remove hose"
The phrase 'remove hose' refers to the action of taking away or detaching a flexible tubular pipe designed to convey fluids, such as water, gas, or oil. It implies physically disconnecting and separating the hose from its intended connection point or source. This phrase is commonly used in various contexts, including plumbing repairs, gardening tasks, or maintenance activities, where it is necessary to disconnect or detach hoses for specific purposes
How to use "remove hose" in a sentence
Basic
Advanced
remove hose
Remove hose connector from flushing attachment.
Reverse procedure to remove hose and solution tube.
Remove hose from elbow and remove.
Squeeze tabs and remove hose.
Remove hose from the vacuum port.
Depress latch and pull out to remove hose.
Remove hose from position shown see diagram.
Shut off water supply and remove hose from fi tting.
Remove hose fitting adapter if used.
Place handle in upright position and remove hose from rack.
Remove hose and clear debris.
Clogged hose Remove hose and clean debris.
Remove hose and clear obstruction.
DO NOT cut off water supply or remove hose attachments during dry cycle.
Remove hose from rear of machine.
See also
Obstruction in gas line Remove hose from BBQ.
Remove hose and blow compressed air through it.
To install disposable filter bag, remove hose from inlet.
Remove hose and clean inlet.
Unscrew hose locking-nut and remove hose from inlet.
Remove hose from storage rack.
If the hose is still blocked, remove hose cuff from nozzle inlet.
Do not remove hose from fi tting while engine is running.
With hood closed, press hose latch tab and remove hose.
Do not remove hose from fitting while engine is running.
Obstruction in gas line CORRECTION, Remove hose from BBQ.
Remove hose from hose adapter on the back of cleaner.
If cleaning stairs or upholstery, remove hose by reversing procedure as shown on page 15.
Remove hose from air tank by turning fitting counterclockwise.
Loosen hose clamp and remove hose from 90 elbow hose barb fitting.
Remove hose from pump discharge to purge air from line.
If cleaning stairs or upholstery, remove hose by reversing procedure as shown on pages 11 and 12.
Remove hose end from side of unit and hose caddy.
Unscrew hose locking-nut and remove hose from inlet Figure 25.
Remove hose from drainage joint and cut hose to appropriate length.
Clogged hose Remove hose and clean debris Clogged filter.
Remove hose from hose retainer and check suction at end of hose.
To remove handle, remove hose and Press handle release button ( C ) to remove.
Remove hose from both the unit and Cleaning Wand ends.
If clogged, remove hose from unit and blow tube out with compressed air.
Remove hose and tools ; remove obstruction.
To do this, remove hose connections ‘ A ' and ‘ B ' and allow the outer tank to drain empty.
Remove hose with tool sleeve from tool 2.
Loosen or remove hose clips ( A ), and undo cinch straps B.
Note, Remove hose from nozzle when cleaning carpets to insure proper cleaning performance.
Remove hose reel box, fillers, and parts bag shipped with your pressure washer.
Remove hose and clean inlet - Pg.
Remove hose if it is in place from the face of the cleaner . SEE PAGE 5.
To remove hose from nozzle, press latch on nozzle connector and pull up, Diagram 6.
Remove hose connectors from 3-way adapter.
You'll also be interested in:
Examples of using Hose
Show more
Store chemical hose so it is protected from damage
Hose nozzle air suction regulator is open
Disconnect hose from used water tank
Examples of using Remove
Show more
You agreed to remove two thousand troops
Remove the battery cover by sliding it downward
Never disable or remove the contact arm
