Examples of 'remove the bulb' in a sentence
Meaning of "remove the bulb"
remove the bulb - This phrase is commonly used when giving instructions for tasks such as replacing a light bulb or removing a defective bulb
How to use "remove the bulb" in a sentence
Basic
Advanced
remove the bulb
Remove the bulb cover mounting screw.
She tried to remove the bulb with forceps.
Remove the bulb in downward directin as illustrate.
This will leave enough clearance to remove the bulb.
Do not remove the bulb when it is hot.
The most difficult thing is to remove the bulb holder.
Remove the bulb by pulling it out gently.
You sometimes have to remove it to insert or remove the bulb.
Remove the bulb ring with a screwdriver.
Lift the bezel up and twist holder to remove the bulb socket.
Remove the bulb by unscrewing it in a counterclockwise direction.
Turn the protruding part of bulb counterclockwise from its back and remove the bulb.
Remove the bulb holder by turning it counterclockwise.
Reach behind the Control Panel and remove the bulb.
Remove the bulb by pulling directly out.
See also
Turn fastening flange F anticlockwise and remove the bulb from the reflector.
Remove the bulb by pulling sidewardDO.
There would be bulb in your house… so remove the bulb.
Remove the bulb by turning it counter.
Unscrew the connecting piece and carefully remove the bulb 5.
Carefully remove the bulb and set it aside.
Therefore, a considerable laser-penetration depth is required to remove the bulb.
Remove the bulb by turning it gently.
Using gloves or a dry cloth, remove the bulb from its packaging.
Remove the bulb retaining ring.
Do not turn the bulb, just pull it down to remove the bulb.
Remove the bulb cover from the rear.
After breaking the adhesive seal, remove the bulb by gently turning.
Carefully remove the bulb ring with a suitable tool.
Remove the spring holding the bulb cover, and remove the bulb cover.
Remove the bulb by pushing it in slightly and turning it counterclockwise.
Rotate the bulb 's socket counterclockwise, and remove the bulb and socket assembly from the housing.
Remove the bulb by grasping and pulling the bulb.
Next, you will have to remove the bulb.
Remove the bulb cover by pulling it out of the opening.
Cause you can not pull out the circuits * * remove the bulb messages.
Remove the bulb by pressing it in slightly and turning it counterclockwise.
Dr. Saroyan. She tried to remove the bulb with forceps.
Remove the bulb by pressing it upwards and then rotating.
Unscrew the connector ( 1 ) and shake lightly to remove the bulb.
Carefully remove the bulb ring using a suitable tool.
Remove the connector from the bulb, unlock the securing clip and remove the bulb » Fig . 158.
Remove the bulb and replace tith the samesizebulb.
Cab light, Using tweezers, remove the bulb and replace with a 5V plug-in bulb.
Remove the bulb to determine the kind needed as a replacement.
She tried to remove the bulb with forceps. But it was too fragile.
Remove the bulb from behind the control panel in the.
She tried to remove the bulb with forceps, but it was too fragile, it snapped.
Remove the bulb socket from lamp assembly by rotating it counterclockwise.
Remove the bulb holder from the reversing light housing.
You'll also be interested in:
Examples of using Bulb
Show more
Unscrew the bulb cover by turning anticlockwise
They also removed his light bulb
Then turn light bulb counterclockwise to remove
Examples of using Remove
Show more
You agreed to remove two thousand troops
Remove the battery cover by sliding it downward
Never disable or remove the contact arm
