Examples of 'remove the cable' in a sentence
Meaning of "remove the cable"
remove the cable: This phrase is used in the context of physically disconnecting or taking out a cable from a system or device. It implies the action of eliminating a cord or wire from a specific location or equipment
How to use "remove the cable" in a sentence
Basic
Advanced
remove the cable
When you remove the cable tie.
Remove the cable of motor spark plug.
You will now be able to remove the cable.
To remove the cable from the transceiver port.
This is how it looks when we remove the cable.
Remove the cable guide from the damper.
My suggestion is to try and remove the cable first.
Remove the cable stop collar.
I will remove the cable.
Remove the cable binders holding the upper and.
Disconnect the plug and remove the cable from the heating pad.
Remove the cable and replace the rubber cover.
Loosen the remote cable guide bolt and remove the cable guide.
Always remove the cable using the plug.
Before performing any work on the mower, remove the cable from the mains.
See also
Carefully remove the cable tie on the power cord.
When disconnecting the external device, be sure to remove the cable from AUX.
To remove the cable management cover follow steps below.
Positioning the bottom panel and intermediate sections - Remove the cable break protection on one side.
Remove the cable for cleaning after each use.
When charging is complete, remove the cable from the device and the charger.
Remove the cable tie from the power cord.
Carefully remove the cable drum 5.
Remove the cable clamps from the poles of the battery.
After using, remove the cable.
And remove the cable from the heating pad.
The plug prevents tampering with the device 270 to remove the cable.
Remove the cable holder otherwise there will be vibratory noise.
When downloading, do not remove the cable until the download is complete!
Remove the cable cover which is secured with cable ties.
Using a 4 mm hex wrench, remove the cable stop bolt and cable stop washer.
Remove the cable gasket and route the network cable.
Using a 4 mm hex wrench, loosen the cable anchor bolt and remove the cable.
In order to remove the cable outlet use a suitable pair of pliers.
It blows . If you remove the cable.
Carefully remove the cable assembly from the process assembly.
Using scissors or wire cutters, cut and remove the cable tie Fig 4.
Remove the cable band from the overhead projector pole.
When finished, remove the cable from Module 4.
Remove the cable.
Step 5:Secure the cords and close the back cover 1 Remove the cable holder.
Please do not remove the cable during downloading the files.
Open the cable gland by unscrewing screw “ F ”, unscrew the terminal screws and remove the cable.
Remove the cable retention clip covering the right battery connector.
When you see the “ Safe to Remove Hardware ” message you can remove the cable.
Cut and remove the cable tie holding the chute crank to.
Remove the cable from its housing at the back of the fryer.
Carefully cut and remove the cable tie around the high pressure hose.
Remove the cable end sleeve from black and brown wires.
Never cut or remove the cable supplied with SPIN.
You'll also be interested in:
Examples of using Remove
Show more
You agreed to remove two thousand troops
Remove the battery cover by sliding it downward
Never disable or remove the contact arm
Examples of using Cable
Show more
Secure the coaxial cable to the ceiling
A cable tie is provided with the appliance
Use plenum rated cable where it is required
