Examples of 'remove the fuse' in a sentence
Meaning of "remove the fuse"
To deactivate a device by removing the fuse that controls its power supply. This phrase is commonly used in the context of electronics or electrical devices
How to use "remove the fuse" in a sentence
Basic
Advanced
remove the fuse
Remove the fuse holder assembly as follows.
Handle and remove the fuse.
Remove the fuse cover and fuse.
But first remove the fuse.
Remove the fuse holder using an appropriate screwdriver.
Iam starting to remove the fuse.
Remove the fuse box screws.
Use a precision slot screwdriver to remove the fuse drawer.
Remove the fuse by sliding it out of its bracket.
Push down and twist to remove the fuse cover.
Remove the fuse with the fuse puller.
I am starting to remove the fuse.
Gently remove the fuse from the fuse holder.
Disconnect the plug from mains or disconnect or remove the fuse.
Remove the fuse holder at the back of the device.
See also
Pull off the fuse holder and remove the fuse.
Remove the fuse holder and replace the fuse.
The fuse should be stabilized lam starting to remove the fuse.
I may remove the fuse.
Unscrew the cap from the fuse holder and remove the fuse.
Remove the fuse block cover or the relay box cover.
Unplug the machine or remove the fuse from the fuse box.
Remove the fuse cover and pull the fuse out.
Unplug the device or shut off or remove the fuse to start the defrosting process.
Remove the fuse holder on the rear panel of the device.
Switch off the circuit breaker or remove the fuse from your household fuse box.
Remove the fuse holder assembly using a small flat blade screwdriver.
Lift off cover and carefully remove the fuse by gently prying under the fuse.
Remove the fuse and replace with a new one of equal amperage.
Circuit breaker to the OFF position or remove the fuse.
Be sure to remove the fuse from the fuse holder at this time.
Turn the circuit breaker to the OFF position or remove the fuse.
Remove the fuse box from its housing and replace it if necessary.
Use a flat-head screwdriver to remove the fuse holder.
Remove the fuse for the circuit being checked or disconnect the battery.
If you have fuses instead of breakers, remove the fuse.
Remove the fuse holder at the back of the device using an appropriate screwdriver.
Pull out the plug, turn off or remove the fuse.
Remove the fuse holder under the power socket at the back of the device.
Remove both screws on the fuse cover, then remove the fuse cover.
Remove the fuse socket from the stay pushing down the lock tab.
Before the actuator is connected, remove the fuse from the fuse box.
Remove the fuse holder cap on the rear panel underneath the power connector.
To replace a fuse, simply unscrew the head of the plug and remove the fuse.
Remove the fuse holder on the backside under the power input with an appropriate screwdriver.
Before the power supply unit is connected, remove the fuse from the fuse box.
You can now remove the fuse and replace it with a fuse of the same type.
Note, Hold the contact spring 8 tightly while you remove the fuse.
Remove the fuse from ceiling when installing the system to prevent battery drain open.
Disconnect the AC from the wall and remove the fuse holder 9 on the back panel.
You'll also be interested in:
Examples of using Remove
Show more
You agreed to remove two thousand troops
Remove the battery cover by sliding it downward
Never disable or remove the contact arm
Examples of using Fuse
Show more
House fuse may not be fully engaged
Looks like it is a fuse with rapid fire
The fuse in the fuse box is blown
