Examples of 'remove the hose' in a sentence
Meaning of "remove the hose"
The phrase 'remove the hose' instructs someone to detach or take away a hose from its current position or connection. The context may vary, but it usually implies the need to disconnect or eliminate the hose for a specific purpose, such as maintenance, replacement, or to stop the flow of liquid or gas through the hose
How to use "remove the hose" in a sentence
Basic
Advanced
remove the hose
Do not remove the hose during operation.
Otherwise it will be difficult to remove the hose.
Remove the hose from the tool.
Do not use any tools to remove the hose.
Remove the hose from hose adaptor.
Remove kinks in the hose or remove the hose.
Remove the hose from the cleaner.
Close the drain valve and remove the hose.
Remove the hose by removing the hose clamp.
Press blue tab and pull backward to remove the hose.
Remove the hose from the hose caddy.
Press the button on the hose down connection to remove the hose.
Remove the hose from the container lid.
Before you start to solder please remove the hose protection nozzle.
Remove the hose and open the lid.
See also
Press the interlock on the hose end and remove the hose from the opening.
Then remove the hose from the tap.
Use an 8 mm flare nut wrench to remove the hose compression nut.
Remove the hose handle from the telescopic tube.
If direct water drain connection is made, then remove the hose connections.
Remove the hose from the rear of the machine.
Press the catches, remove the hose and open the front cover.
Remove the hose to room temperature and atmospheric pressure.
Then fill it with water, remove the hose and seal the hole.
Remove the hose from the bottom of the petcock.
With your thumb, press the release button and remove the hose.
Remove the hose from the continuous drainage hole.
Press the catches on the hose, remove the hose and open the cover.
Remove the hose and pole from the unit.
When continuous drainage is not used, remove the hose to collect water with the tank.
Remove the hose and dust bag from the tool.
Pressing down the release button will help you to insert or remove the hose fig . 1.
Remove the hose.
To clean the filter, first turn off your tap and then remove the hose.
You can remove the hose while water is in the tank.
We're now going to shut off the ventilator… and then remove the hose.
Remove the hose only when the device has cooled down.
Drain tool Remove the hose from the tool.
Remove the hose assembly and gun assembly from the carton.
Note, Make sure to remove the hose before releasing the latches.
Remove the hose adapter unit and clean it under warm water.
To operate the Inflator, remove the hose which contains the valve adaptor and pressure.
Remove the hose from the inlet side of the heat exchanger coil.
Unthread and remove the hose coupler from the Connectamajig coupler.
Remove the hose from the item and store it on the side of the unit.
Remove the hose by turning the hose connecting piece and withdrawing the hose.
Remove the hose filter from the hose and get out the strainer.
Remove the hose from the housing by lifting It straight up.
Remove the hose from the retaining loop-clamp.
Remove the hose and cool it at room temperature for 2 hours.
You'll also be interested in:
Examples of using Hose
Show more
Store chemical hose so it is protected from damage
Hose nozzle air suction regulator is open
Disconnect hose from used water tank
Examples of using Remove
Show more
You agreed to remove two thousand troops
Remove the battery cover by sliding it downward
Never disable or remove the contact arm
