Examples of 'remove the jumper' in a sentence
Meaning of "remove the jumper"
remove the jumper - To take off a piece of clothing, typically a jumper or sweater
How to use "remove the jumper" in a sentence
Basic
Advanced
remove the jumper
Remove the jumper to disable the function.
You will need to simply remove the jumper and cover the opposite two pins.
Remove the jumper cables before connecting.
When connecting the speaker cable, you must remove the jumper cable.
Remove the jumper between the connections.
Before connecting the speaker cable, you must remove the jumper cable.
Remove the jumper and give it a try.
Simply jump-start your car and then remove the jumper cables as quickly as possible.
Remove the jumper cables in the reverse order.
Note, that you have to remove the jumper cap inoreder to use the EN pin.
Remove the jumper from the cooler power supply.
If you will not use the PRE OUT / MAIN IN terminals, never remove the jumper pins.
Remove the jumper wire and retighten the connections.
Use a paper clip to remove the jumper connector and re-locate to the proper posts.
Remove the jumper if the line continues towards other receivers.
See also
Do not remove the jumper wire unless connecting a rain sensor.
Remove the jumper cable from the ground metal surface.
Do not remove the jumper cables while the message is displayed.
Remove the jumper cable from the jump starting stud.
Remove the jumper if the line continues towards other video handsets.
Remove the jumper cables in the reverse order that they were connected.
Remove the jumper cables exactly in the reverse sequence as for clamping.
Remove the jumper that releases the external potentiometer for the utilization of the same.
Do not remove the jumper cables while the i-ELOOP indicator light is fl ashing.
Only remove the jumper ( a ) for switching off the integrated speaker.
Remove the jumper cables, starting with the negative ( black ) clamps.
Remove the jumper cable on the negative ( - ) connection of the booster vehicle 's battery.
Remove the jumper cable from the positive ( + ) terminal of the booster vehicle 's battery.
Remove the jumper between terminal 24V and on the boiler control.
Remove the jumper wire and retighten the connections see Figure 12.
Remove the jumper cap from JBAT1.
Remove the jumper cable on the negative ( - ) terminal of the booster vehicle 's battery.
Remove the jumper connector from the power input board connector CN1202.
You'll also be interested in:
Examples of using Jumper
Show more
I will finish the jumper in four days
No jumper call came through our switchboard
Better get those jumper cables ready
Examples of using Remove
Show more
You agreed to remove two thousand troops
Remove the battery cover by sliding it downward
Never disable or remove the contact arm
