Examples of 'remove the lamp' in a sentence
Meaning of "remove the lamp"
Instructs or requests to take out or uninstall the lamp from its current position or location
How to use "remove the lamp" in a sentence
Basic
Advanced
remove the lamp
Remove the lamp from the bumper.
Never attempt to remove the lamp when it is.
Remove the lamp from the holder.
Loosen the screws and remove the lamp cover.
Remove the lamp and insert a new one.
Remove the screws and then remove the lamp cover.
Carefully remove the lamp assembly by pulling it rearward.
Use a small flat blade screwdriver to remove the lamp lens cover.
Attempt to remove the lamp when it is hot.
Disconnect the spotlight from the mains and remove the lamp casing.
Remove the lamp carefully using protective gloves.
Use a small screwdriver to remove the lamp by pushing its edges upwards.
Remove the lamp carefully from the body.
Loosen the screw and remove the lamp wire from the holder.
Remove the lamp cover by squeezing in the sides.
See also
Lift up the lamp handle and remove the lamp module slowly and carefully.
Remove the lamp cover refer to the illustration.
Disconnect the AC power light plate and remove the lamp lighting.
Remove the lamp and rope.
When you wipe it, you can remove the lamp by yourself.
Remove the lamp fixing bracket.
Loosen the screw with a cross slot screwdriver, and then remove the lamp cover.
Do not remove the lamp cover at the time of replacement.
Use a Phillips 2 screw driver to remove the lamp cover.
Remove the lamp and replace it with a lamp resistant.
Now, you can easily remove the lamp.
Remove the lamp ring with a screwdriver or similar tool.
Pull up on the lampmodule 's handle, and then remove the lamp.
Remove the lamp housing by pulling out the handle.
Replacing the lamps - Disconnect the hood from the electricity . - Remove the lamp cover R by pushing.
Remove the lamp and replace with a lamp resistant to.
Press off the flexible tongue in direction of arrow fig . 180 and remove the lamp holder.
Remove the lamp cover with a gentle upward tug.
Lanterns ( front above ), Remove the lamp housing by pulling up from the model.
Remove the lamp and replace with the new one.
You can remove the lamp cover for a while when installing on the ceiling.
Remove the lamp with the aid of a screwdriver see diagram.
Remove the lamp connector by pulling the tabs out and then upwards.
Remove the lamp from the light support and replace with new lamp.
Remove the lamp and replace the new one of the same power rating.
Remove the lamp in upward direction from the chamber and lamp connector base.
Remove the lamp cover, turn it counterclockwise to unscrew.
Remove the lamp cover refer to the il - lustration.
Remove the lamp holder in the direction of the arrow 8.
Remove the lamp connector in the direction of the arrow 8.
To remove the lamp glass unscrew the 8 screws at the lighting.
Remove the lamp cover carefully, use a screw driver as a lever.
Remove the lamp cover, use a flat bladed screw driver as a lever.
Remove the lamp protection film, and then set it in a safe place.
Remove the lamp shade from the lamp base by turning it anti-clockwise.
You'll also be interested in:
Examples of using Lamp
Show more
The following lamp caps may be selected
A lamp will light up when switch is turned on
W quartz halogen lamp if used without a filter
Examples of using Remove
Show more
You agreed to remove two thousand troops
Remove the battery cover by sliding it downward
Never disable or remove the contact arm
