Examples of 'remove the spool' in a sentence
Meaning of "remove the spool"
remove the spool ~ to take out or extract the cylindrical device on which something is wound, such as thread or tape
How to use "remove the spool" in a sentence
Basic
Advanced
remove the spool
Remove the spool and check if the.
Keep the tabs depressed and remove the spool cover.
Remove the spool retainer bolt.
If the bump feed does not work Keep the tabs depressed and remove the spool.
Remove the spool from the line head.
Automatic line feed does not work Keep the tabs depressed and remove the spool cover.
Remove the spool from the string head.
If the grass trimmer vibrates, remove the spool.
Remove the spool and spring.
If your trimmer vibrates, remove the spool and replace it in a new position.
Remove the spool and unwind the cutting.
Press in both spool cover lock buttons, then remove the spool cover.
Remove the spool from the bump head.
Press the housing latches inward to lift off the cover, then remove the spool.
Remove the spool of wire from the spool gun.
See also
If this happens, remove the spool and reroute the line out of the spool.
Remove the spool and check if the lever can.
Carefully remove the spool locking knob, spring and washer 3.
Remove the spool and check that the spring is.
Remove the spool and spring from the string head.
Remove the spool and check if the lever in the cassette.
Remove the spool and the rest of the nylon line.
Remove the spool and check if the lever can move freely.
Remove the spool from the bottom part of the line head.
Remove the spool and check if the lever in the spool housing.
Remove the spool from the tool and remove and discard all line.
Remove the spool and check if the lever in the cassette can move freely.
Remove the spool and check if the lever in the spool housing can move freely.
Remove the spool from the tool and remove and discard all line on the spool.
Remove the spool and unwind the cutting line, then.
Remove the spool cover and the spool, as previously described.
Remove the spool and unwind the cutting line, then wind it on.
Remove the spool of top thread, turn it round so that the thread.
Remove the spool and unwind the cutting line, then wind it on neatly again.
Remove the spool and the cup . And remove the old nylon cord from the spool.
Remove the spool housing as described in the " Replacing Spool.
Remove the spool and string head from the drive connector 46.
Remove the spool cover and spool f rom spool housing See Figure 23.
Remove the spool cover from the housing 12.
Remove the spool and check if the lever 20.
Remove the spool quick lock, by pushing in and rotating 1/4 turn counterclockwise.
Remove the spool and the spring Fig 25.
You'll also be interested in:
Examples of using Remove
Show more
You agreed to remove two thousand troops
Remove the battery cover by sliding it downward
Never disable or remove the contact arm
Examples of using Spool
Show more
Put a spool of thread on the spool pin
Check to see if the spool is properly wound
Move spool holder to remove both spools
