Examples of 'replace the cable' in a sentence
Meaning of "replace the cable"
replace the cable - This phrase instructs to remove an old or damaged cable and install a new one in its place, typically in a mechanical, electrical, or technological context
How to use "replace the cable" in a sentence
Basic
Advanced
replace the cable
Replace the cable or check the terminals.
No need to replace the cable itself.
Replace the cable in the case of unraveling.
You should replace the cable.
Replace the cable if bent or damaged.
The user must not replace the cable.
Replace the cable tension monitor.
The solution to this issue is to replace the cable.
Replace the cable cover and tighten the screws.
It is easy to replace the cable.
Do not replace the cable with a cable of lesser strength.
There is a possibility to replace the cable and ear cups.
Replace the cable if you see any broken strands.
If any insulation damage exists replace the cable immediately.
Replace the cable if it is cracked, split or otherwise damaged.
See also
If the resistance is above one ohm replace the cable.
Tighten up the screws and replace the cable protection cover and the front panel.
Do not try to repair the device yourself or to replace the cable or plug.
If defective, replace the cable immediately.
Only a qualified person must install this appliance and replace the cable.
Replace the cable with a known good one if you suspect that it 's gone bad.
The cable has been damaged in such case replace the cable with a new one.
Let's replace the cable from.
Audio connection cable is damaged Replace the cable.
I 'd thought Google TV was going to replace the cable and satellite TV companies.
Battery capacity too low Replace the battery Cable cross section too small Replace the cable.
Do not attempt to repair the device or replace the cable and / or plug yourself.
During servicing jobs, it is easier to carry and replace the cable.
If yes, repair or replace the cable.
If the cable or connectors are damaged in any way, replace the cable.
Cable cross section too small Replace the cable 8, page 6.
In the first case, to solve the problem, it is enough to replace the cable.
If this message persists, replace the cable.
If you see any, ask your electrician to replace the cable at once.
Connect all cables to the projector, and then replace the cable cover.
If the connection is loose or heavily corroded, clean or replace the cable and retest.
Frequently inspect input power cable for wear and tear, replace the cable immediately if damaged.
Do you think I should attempt to replace the cable first?
If that 's the case, you will want to replace the cable anyway.
You'll also be interested in:
Examples of using Cable
Show more
Secure the coaxial cable to the ceiling
A cable tie is provided with the appliance
Use plenum rated cable where it is required
Examples of using Replace
Show more
Replace the leads in the rear upright
Do not attempt to replace the plug yourself
Replace the lid before recommencing blending
