Examples of 'required thickness' in a sentence
Meaning of "required thickness"
required thickness: Denotes the specific measurement or dimensions of thickness that are necessary or mandated for a certain purpose or use
How to use "required thickness" in a sentence
Basic
Advanced
required thickness
Evaluation of the required thickness of strengthening overlays.
Repeat this operation until the sheet is of the required thickness.
The required thickness of the gypsum.
The paste was laminated to required thickness and cut.
The required thickness of the plate is largely dependent on pressure.
The substrate is preferably rolled to a required thickness following spraying.
The required thickness of the shell is determined by compression and shear resistances.
The only distance is the required thickness of the sealing ring.
Then he closes in on itself and continue to work it to the required thickness.
The required thickness of the print is determined by the mesh count of the screen.
A plurality of layers are generally superposed in order to reach the required thickness.
The required thickness will depend on the precise mode of use of the polymer composition.
It was glued on discs in order to have the required thickness in the damper.
This would show the required thickness for preventing the passage of unacceptable layers of contaminants.
The difference between the two readings gives the required thickness.
See also
Slices are then cut to the required thickness and expanded to give the honeycomb structures.
The dipping procedure is repeated as necessary to build up a layer of the required thickness.
Set the required thickness of slicing within the range 7.
The number of cycles can be varied to obtain a required thickness on the surface.
After a layer of the required thickness has been applied, the mask is removed.
Thermoplastic honeycombs are usually produced by extrusion followed by slicing to the required thickness.
The depth of the holes equated to the required thickness of the boat bottom.
Required thickness of the material causing optical distortion and eye strain in operators ;.
Gelling or thickening agents are used to impart the required thickness to the pastry cream.
The required thickness for motor oil, ethylene glycol and hydraulic fluid is 5 mm.
Such skins are produced by laying several layers of fabric into a stack of required thickness.
Material required thickness (relative to lead).
A rolling mill line produces continuous sheets of steel in the required thickness and width.
The required thickness of the board was 16 mm in each case.
This ensures that the molecular creep phenomena are maintained until the required thickness is obtained.
Example 2 The required thickness of the sealing layer was calculated to be 9 cm.
SPD can be used to create almost any required thickness.
Please indicate your required thickness for the gelatine ( standard is 20 µm ).
A plurality of veneers are then laid-up to form sheets of required thickness.
Set the required thickness of slicing within the range 0-15 mm using the crank.
Circles are cut in half and doubled to required thickness for Shore A testing.
Preferably the spring means is a Belleville washer, having opposing flat surfaces and of a required thickness.
Thus, a copper covering layer of a required thickness can be formed.
The required thickness is at least 5 microns and can then range from 5 to 150 microns.
A plurality of veneers is then laid-up to form sheets of required thickness.
The required thickness of the nickel layer was 10µm, the plating time therefore was 30 min.
The member 8 can thus be made to the required thickness and profile.
Measure the current thickness of the workpiece, and compare with required thickness.
Example, Total coating required thickness 3 mm with a minimum overlap of 50 %.
Therefore, an ion-releasing layer having a minimum required thickness will suffice.
The container main unit 3 is made from a resin material with a required thickness.
Iii . K-factor is given with a required thickness ( T ) in inches.
Repeat the above procedures until the thickness of the film 1 achieves the required thickness.
By varying the deposition time, coatings of the required thickness may be obtained.
The modulation element 20 is then chosen, prepared and cut to give it the required thickness.
You'll also be interested in:
Examples of using Required
Show more
Tools required for installation not supplied
Evacuation for the required authorized care
Put required amount of water into tank
Examples of using Thickness
Show more
Minimum recommended thickness of zinc vs thickness of steel
Thickness of tanks made with double walls
Reduction of wall thickness and additional protection
