Examples of 'reservoir cap' in a sentence
Meaning of "reservoir cap"
This phrase is typically used in the context of automotive or mechanical engineering. It refers to a protective or sealing cap that is used to cover or enclose the opening of a reservoir, such as a coolant reservoir or brake fluid reservoir. It helps prevent contaminants, debris, or foreign substances from entering the reservoir and assists in maintaining the proper functioning and integrity of the system
How to use "reservoir cap" in a sentence
Basic
Advanced
reservoir cap
Close the oil reservoir cap before.
A reservoir cap is secured to the reservoir and closes the open end.
Reinstall the chain oil reservoir cap.
Remove the water reservoir cap by twisting in counterclockwise.
Replace the water reservoir cap.
Remove the reservoir cap to check the oil level.
Remove the oil reservoir cap.
It is obviously still possible to fill the reservoir by simply unscrewing the reservoir cap.
Master cylinder reservoir cap missing.
Clean the reservoir cap before removal to prevent dirt or water from entering the reservoir.
Refit the oil reservoir cap.
These multiple openings per reservoir may each be closed off by its own reservoir cap.
Remove the rinse aid reservoir cap by rotating it counterclockwise.
QUick vieW oil indicator oil reServoir caP.
Close the rinse aid reservoir cap by rotating it clockwise.
See also
To avoid burns from escaping steam when removing Water Reservoir cap to refi ii unit.
Unscrew the reservoir cap and remove the seal.
X Remove washer fluid reservoir cap.
Do not open the oil reservoir cap when hot unless it is absolutely necessary.
Reinstall the Schrader valve into the IFP reservoir cap.
Make sure the salt reservoir cap is correctly fi tted.
The Reservoir Cap helps to minimize spills when refilling the Reservoir.
Never remove radiator cap or overflow reservoir cap when engine is hot.
The Reservoir Cap helps to minimise spills when refilling the Reservoir.
Make sure rear brake fluid reservoir cap is secured to prevent fluid loss.
Fill the Reservoir with water and replace the Reservoir Cap.
Scalding may occur if the reservoir cap or filter basket holder are removed.
Refer to the following figure for the location of the Fuser Oil Reservoir Cap.
Never remove the coolant reservoir cap while the engine is running or hot.
Apply a thin layer of grease to the IFP reservoir cap o-ring.
A reservoir may have several reservoir cap supports in various configurations over its reservoir contents.
In another embodiment using an active release mechanism, the reservoir cap material is melted i . e.
Pull up on the IFP reservoir cap to seat it against the retaining ring.
Pump has been tested and is in good working condition, Reservoir cap is missing.
In one embodiment, a discrete reservoir cap completely covers a single opening in a reservoir.
To fill the Reservoir, turn the Reservoir upside down and remove the Reservoir Cap.
DO NOT remove radiator cap or reservoir cap if engine is warm or running.
Turn the reservoir cap counterclockwise to re-move, then check the oil level in the reservoir.
In one embodiment of passive devices, the reservoir cap is thermally stimulated to enhance degradation.
Flip Storage Compartment lid open, and cautiously unscrew and remove Water Reservoir cap.
Warning, Clean the reservoir cap area before open it.
Use a T10 TORX wrench to remove the remaining reservoir cap bolt.
After moving, Open oil reservoir cap until the hydraulic oil reservoir is vented.
To bleed the rear brake system, - Remove the fluid reservoir cap see previous page.
Locally heating individual reservoir caps to temperature T2 causes the reservoir cap to become molten.
To check level: Remove reservoir cap.
Turn the reservoir cap counterclockwise to re-move, then.
Remove the liquid reservoir cap 21.
The reservoir cap support ( s ) may be integral with upper substrate portion.
The device of claim 11, wherein the reservoir cap is formed of a polymeric material.
You'll also be interested in:
Examples of using Reservoir
Show more
Refill the reservoir if the water is low
There is not enough water in the reservoir
Fill the reservoir to the maximum indication
Examples of using Cap
Show more
Retighten the cap to the filter housing
Cap and back panel sheet steel
Do not install cap onto water bottle
