Examples of 'reset by pressing' in a sentence
Meaning of "reset by pressing"
reset by pressing - This phrase refers to the action of restoring or restarting a device or system by pressing a specific button or sequence of buttons
How to use "reset by pressing" in a sentence
Basic
Advanced
reset by pressing
It can be reset by pressing the test button.
Some messages can be acknowledged and reset by pressing RESET.
You could do a reset by pressing two reset buttons.
Reset by pressing the RESET key in the battery compartments.
Once activated it is reset by pressing the blue button.
To reset a total value, select the value you want to reset by pressing START.
This status is reset by pressing any of the following keys.
The seconds will blink on the display and can be reset by pressing START.
The circuit breaker may be reset by pressing the circuit breaker reset button.
RESt Reset to factory settings no Do not perform reset by pressing ENTER.
The message is reset by pressing the OFF button.
Deactivate clean condenser coil light before automatic reset by pressing Alarm Off pad.
Confirm the reset by pressing OK soft button.
The grease filter saturation display is reset by pressing the F key.
Batteries are low Reset by pressing RESET button or removing battery for.
See also
If the circuit breaker trips, it can be reset by pressing the switch.
The watch can be reset by pressing and holding SET and SEL together.
Once the grease filters have been cleaned and replaced, reset by pressing the timer button F.
Be reset by pressing for 3 seconds button 1 on the control panel or button 4 on.
This is normal and can be reset by pressing any key.
The hands are reset by pressing another pusher, located on the upper left at 10 o'clock.
After 4 minutes the LED flashes rhythmically at a one second frequency ; reset by pressing any button.
The value can be reset by pressing and holding SET.
R The network configuration can be reset by pressing “ R ”.
This function must be reset by pressing the button for 5 seconds.
Reset by pressing the rocker switch to position " I " 3.
The acoustical signal can be reset by pressing the RESET button.
The overheating protector can be reset by pressing through the label with a screwdriver Figure 10.
The accumulated load and number of loads can be reset by pressing the Start-button once.
Some items can be reset by pressing the SET / CLR button.
Deactivate fast freeze mode before automatic reset by pressing * pad then FAST FREEZE.
The device can be reset by pressing the RESET button 15.
An existing media channel access list 1 may be reset by pressing reset button 19.
The alarm can be reset by pressing 0/1 on the panel.
When there are no remaining shots, the counter is reset by pressing the reset button ( 9 ).
This alarm can be reset by pressing the " ON / OFF " button.
Selected error codes, The error code can be reset by pressing the MMA-key pad.
Make sure the system is reset by pressing the CANCEL pad once.
Some messages can be acknowledged and reset by pressing the SELECT / RESET stem.
Sists, do a hardware reset by pressing the AC.
The Min / Max values can be reset by pressing the Edit knob.
Deactivate max cool mode before automatic reset by pressing * pad then MAX COOL pad.
Auger motor is not working or is over - Reset by pressing ON / OFF button.
The alarm can be reset by pressing 0 /.
If the LED flashes, the alarm can be reset by pressing button 11.
You'll also be interested in:
Examples of using Pressing
Show more
You would love pressing that button
Pressing concerns pull mind from task
Choose a programme by pressing the corresponding button
Examples of using Reset
Show more
You can reset it as soon as you are done here
Programming the volume reset to factory settings
Reset the machine by reducing the load
