Examples of 'reset the circuit breaker' in a sentence
Meaning of "reset the circuit breaker"
Reset the circuit breaker: To manually switch the circuit breaker to its original position to restore electrical power after a circuit overload. This phrase is commonly used in the context of fixing electrical issues in homes or buildings
How to use "reset the circuit breaker" in a sentence
Basic
Advanced
reset the circuit breaker
Replace fuse or reset the circuit breaker.
Reset the circuit breaker at the electrical panel.
Replace the fuses or reset the circuit breaker.
Reset the circuit breaker on the back of the scanner.
Then push the button to reset the circuit breaker.
Reset the circuit breaker or replace the fuse if it is tripped or blown.
Replace the blown fuse or reset the circuit breaker.
Reset the circuit breaker if the button is in the tripped position.
Have an electrician replace the fuse or reset the circuit breaker.
Reset the circuit breaker if the fuse interrupts the circuit.
Wait a few minutes and push the button in to reset the circuit breaker.
Do not reset the circuit breaker until all electrical shorts have been repaired.
Before continuing with operation allow the mill to cool off or reset the circuit breaker.
Replace the fuse or reset the circuit breaker blown or the circuit breaker tripped.
Power On switch to the Off position and reset the circuit breaker.
See also
Replace the fuse or reset the circuit breaker repaired by a service technician from our company.
NOT WORK Replace the fuse or reset the circuit breaker.
Reset the circuit breaker or replace Relay.
Circuit overload Check household fuse box and reset the circuit breaker or replace the fuse.
To reset the circuit breaker and resume operation, do the following.
BLANK Replace the fuse or reset the circuit breaker.
Reset the circuit breaker by depressing the button, and then turn the UPS on.
If not, attach and reset the circuit breaker.
Household fuse blown or circuit breaker tripped - Replace the fuse or reset the circuit breaker.
If required, reset the circuit breaker by pressing it down.
You can restart the sockets by reset the circuit breaker 6.
Reset the circuit breaker 15 on the rear panel of Pulsar STS.
To use the cooktop again, disconnect from power or reset the circuit breaker.
Disconnect excess equipment and reset the circuit breaker 20 by pressing the corresponding button.
Once the problem has been corrected, push the button in to reset the circuit breaker.
Reset Switch, Used to reset the circuit breaker that protects the power supply.
When the problem is solved, simply push the button to reset the circuit breaker.
Wait 10 seconds, reset the circuit breaker and then turn the UPS on.
Problem Solution The unit doesn't start- Check the fuse or reset the circuit breaker.
To resume welding, reset the circuit breaker F2.
Once the problem has been corrected, reset the circuit breaker by pushing the button in.
You'll also be interested in:
Examples of using Breaker
Show more
The following breaker sizes are recommended guidelines
Might be a problem with your circuit breaker
Verify that circuit breaker is not tripped
Examples of using Reset
Show more
You can reset it as soon as you are done here
Programming the volume reset to factory settings
Reset the machine by reducing the load
Examples of using Circuit
Show more
Each electrical circuit corresponds to a track block
Circuit breaker has tripped due to an overload
A household fuse or circuit breaker has tripped
