Examples of 'residual porosity' in a sentence
Meaning of "residual porosity"
residual porosity: The remaining small openings or holes within a material or substance after a process like filtration or refinement
How to use "residual porosity" in a sentence
Basic
Advanced
residual porosity
The black spots are the residual porosity.
A certain residual porosity was again noted.
The composite material retains residual porosity.
A surplus of water creates residual porosity as the hydration proceeds under the applied pressure.
It would be advantageous to overcome this residual porosity.
It was determined this small amount of residual porosity would be inconsequential to engine performance.
This requires several steps and often leaves residual porosity.
The residual porosity between the immobilized particles nevertheless allows the passage of the liquid.
This cathode had no residual porosity.
Indeed, residual porosity disappearance is the main criterion to get good interfaces mechanical strength.
A zone is obtained filled with sintered grains leaving residual porosity therebetween.
The residual porosity of the resulting disks was 8 % of the volume.
This component makes it possible to reduce the residual porosity of the product.
A residual porosity of at least 20 % very often appears.
The transition zone could be seen as a cobalt band with little or no residual porosity.
See also
However, printed piezoelectric thick films maintain a residual porosity that is detrimental to the piezoelectric properties.
It has been observed that the final material can have a residual porosity of up to 10 %.
Advantageously, the residual porosity is not less than 15 % by volume.
The texture was densified by pyrocarbon vapor infiltration until a residual porosity of about 15 % was achieved.
The infiltration is continued until a residual porosity of preferably less than 15 % is attained.
The conductivities ratio is maximal for 30 % of residual porosity.
This gives a composite disk having a residual porosity below 3 % and a density of approximately 4.6.
Infiltration is continued, preferably until the residual porosity is less than 15 %.
Such materials generally have an open residual porosity of at least 10 % volumewise.
The pan made in this way has a residual porosity of 30 %.
A sealing problem then clearly arises because of the residual porosity of the composite material.
Moreover, it was not possible to show up any residual porosity in the impregnated region.
Infiltration was continued until the residual porosity was about 15 %.
This gives a disk having a residual porosity below 2 %.
You'll also be interested in:
Examples of using Residual
Show more
This is residual emotion from the stitch
A cooking zone stay hot residual heat
The existing residual heat is no longer displayed
Examples of using Porosity
Show more
Porosity calculated from other measured parameters
It has very low porosity and permeability
Porosity could also skew crater counts
