Examples of 'residual stresses' in a sentence
Meaning of "residual stresses"
residual stresses - This phrase refers to internal stresses that remain within a material or structure even after external loads or forces have been removed. These stresses can be caused by various factors, such as manufacturing processes, changes in temperature, or applied forces
Show more definitions
- plural of residual stress
How to use "residual stresses" in a sentence
Basic
Advanced
residual stresses
The residual stresses played an important role.
Cooling can also result in residual stresses.
Residual stresses and fatigue crack propagation.
At higher temperature the residual stresses as a whole relax.
Residual stresses are measured through experiments.
It is then necessary to reduce residual stresses as far as possible.
Residual stresses are lower due to lower infiltration temperature.
Toolox has a very low level of residual stresses.
Actual residual stresses are accounted for in the simulation.
It also does not suffer from springback or residual stresses.
Occurrence of residual stresses in fabrication and their removal.
Some of the process steps induce residual stresses.
Such residual stresses reduce the fatigue life.
The presence of a sufficient level of applied or residual stresses.
Almost zero residual stresses.
See also
These residual stresses are relieved in a subsequent heat treatment process.
It is then important to reduce the residual stresses as far as possible.
Such residual stresses may be imposed vÃa an injection molding process.
Time required for measuring residual stresses in plastic materials.
The residual stresses may affect the strength of a composite material.
The different methods to measure residual stresses had deviation.
Residual stresses in rotating steel cylinders with composite surface layers.
Numerical simulation of thermal residual stresses in a functionally graded material component.
Final straightening is usually a source of very detrimental local residual stresses.
Influencing the residual stresses in a suction roll by controlled cooling.
Arrange the weld sequence so that the residual stresses are minimized.
To reduce residual stresses the stress relief or annealing should be performed.
Welding results in the accumulation of residual stresses that aggravate cracking.
Description of residual stresses and distortion of part related to the manufacturing process.
Experimental methods for determining the residual stresses of composite laminates.
The residual stresses related to the operation of cutting thus induce buckling.
Cristallographic texture and initial residual stresses were considered in this analysis.
Residual stresses introduced by sandblasting play an important role on the material resistance.
It is also favourable that the residual stresses decrease comparatively evenly.
Residual stresses and their influence for detection and sizing of defects.
This temperature gradient gives rise to residual stresses in the part.
Several sources of residual stresses characterize the entire gear manufacturing chain.
State of the art regarding the problem of residual stresses in welds.
The changes in residual stresses with different thermal cycles was analyzed.
Stretching and compression are means to reduce residual stresses in such plates.
Strain rate and residual stresses are also expected to affect this surface.
An example of a method of forming the compressive residual stresses is shot blasting.
Compressive residual stresses are mainly the origin of the enhancing life duration.
Simulations also show a relaxation of residual stresses after one hour of annealing.
Residual stresses are believed to be the main cause of part shrinkage and warpage.
Advanced solutions for eliminating residual stresses in the manufacture of metal sheets.
The above cooling cycle results in less distortion and residual stresses.
The effects of residual stresses resulting from forming or welding were also investigated.
Stress relieveing is recommendened for large weld repairs to reduce residual stresses.
This balancing of residual stresses increases the consistency of subsequent forming operations.
You'll also be interested in:
Examples of using Residual
Show more
This is residual emotion from the stitch
A cooking zone stay hot residual heat
The existing residual heat is no longer displayed
Examples of using Stresses
Show more
Mitigating the stresses that drive change
Stresses the need for general disarmament
My life coach always stresses the importance
