Examples of 'resin content' in a sentence
Meaning of "resin content"
resin content - Refers to the proportion or amount of resin present in a material, such as composite materials or coatings. It is an important factor in determining the overall properties and performance of the final product
How to use "resin content" in a sentence
Basic
Advanced
resin content
Capped silicones with high resin content are preferred.
Federal law originally defined marijuana in terms of resin content.
This gasoline has a high resin content and impregnation is not required.
A preferred course of action is to encourage higher recycled resin content in new products.
The resin content is also dependent on the fibrous material in the prepreg.
Compaction is through fiber tension and resin content is primarily metered.
The resin content delivers a range of tastes and effects with each draw.
The higher quantity of fibers increases the resin content in impregnation.
The phenoxy resin content also be expected to lessen the solvent resistance of the blend.
Usually glass fibers require a lower resin content than carbon fibers.
Such properties as peel strength increase linearly with increasing resin content.
And the presence of high resin content reduces the hygroscopicity of spruce wood.
High performance same fiber composite hybrids by varying resin content only.
Additionally the high and low resin content prepregs were alternated as indicated below.
The fibers are coated with the same resin and contain the same resin content.
See also
Stacks made from webs with a low resin content can be expanded at room temperature.
CTMP pulp produced by a sulphite process may also have a high resin content.
This creates uneven thickness and differences in resin content through the composite structure.
Resin content was nominally 33 weight percent based on the weight of the finished prepregs.
The wood of this coniferous tree has a high resin content extremely resistant to moisture fluctuations.
Optionally, the first prepreg ply has an elevated resin content.
The vacuum process regulates the heater resin content in conjunction with the fiberglass selected.
Excess resin is then removed by metering rolls 32 to achieve the required resin content.
In male cannabis plants, resin content is usually pretty low.
They are tall sativas with a long flowering time and medium-low resin content.
For electrical cables, the resin content needs to be minimal.
An epoxy resin content of about 5 % by weight is particularly preferred.
Generally high quality HDF is used with a high resin content and low water swelling.
In this case, the resin content in the production must be reduced.
Some woods are less sensitive than others, owing to resin content or construction.
The concentrated product has a resin content of about 30 percent modified phenoxy resin solids.
During the impregnation process, care is taken to control resin content very closely.
Preferably, the sodium ionomer resin content is made from two different sodium ionomer resins.
Resin was applied to the cloth to provide a resin content of 67 % wt.
The thermosetting resin content before polymerization is about 44 % by weight.
Fertilization increased the lignin content of posttreatment wood by about 3 % and the resin content by 2 %.
In addition, Gallacher utilizes a high binder resin content because he is seeking dense fibrous mats.
The resin content was 30 percent calculated on dry impregnated paper.
The resultant composite laminate had a resin content of about 40 % by weight.
The resin content was 46 % by weight calculed on dry impregnated paper.
The cured laminates are weighed and the resin content is determined to be about 35 %.
The resin content was 48 percent by weitht calculated on dry impregnated paper.
This layup was intended to produce a resin content on the face sheets of approximately 41 %.
The resin content control envelope is, in turn, enclosed by a vacuum envelope.
More preferably the organic peroxide composition constitutes from 1 % to 4 % of the total resin content.
Each ply had a resin content of approximately 16 % by weight of the ply.
Example 3, Permeability of adhesives with high and low resin content.
The hydrocarbon resin content is even more preferably between 5 and 25 phe.
Initially, the U.S. federal law defined marijuana in terms of its resin content.
Its resin content can reach 40 % by weight, a factor contributing to its sticky consistency.
You'll also be interested in:
Examples of using Content
Show more
On the product content and environmental release
Content management interfaces for web systems
Adjusts style and content when necessary
Examples of using Resin
Show more
Removes resin deposits from raw wood
Shell made from injected thermoplastic resin
Pour catalyzed resin onto prepared substrate
