Examples of 'resin has' in a sentence
Meaning of "resin has"
resin has: Refers to the quality or characteristics of resin. This phrase is often used in art and craft discussions to highlight the durability, texture, or other properties of resin materials
How to use "resin has" in a sentence
Basic
Advanced
resin has
The resin has a long life in adsorption.
The abnormal development of resin has been called succinosis.
Each resin has a set of processing characteristics.
Stirring continues until the resin has completely dissolved.
The resin has a positive nature.
The worksheets are removed once the resin has solidified.
The resin has at least two.
The part is unmolded after the resin has cured.
An aromatic vinylic resin has an excellent electrostatic property.
Thus the application of brominated epoxy resin has been limited.
This resin has no gel without adding a crosslinker.
It can be harvested once the resin has hardened into crystals.
This resin has a styrene divinylbenzene copolymer matrix.
These results showed that the resin has polymerized correctly.
The resin has to absorb water to reach high performance.
See also
This type of protective resin has particular strength properties.
The resin has to absorb water to achieve full performance.
The acrylic resin as another resin has now been fully described.
The resin has been burned as incense for thousands of years.
The bores may be created after the resin has cured.
The tested resin has become much more transparent.
The overcoat layer including such a phosphazene resin has excellent heat resistance.
The epoxy resin has an epoxy functionality of three or greater.
The panel is removed from the mold after the resin has finished hardening.
The thermoplastic resin has the flexibility to be able to foam.
This enables the excess resin to be easily separated after the resin has been cured.
However the solid resin has no tack at ambient temperature.
The material deposited really only adheres at the places where the resin has been opened.
The advanced resin has terminal glycidyl ether moieties.
Such a step is preferably performed after the resin has substantially filled the gap.
The resin has been found to be friable and easily ground.
In certain embodiments the epoxy resin has at least two epoxy functionalities.
The resin has a surface to which the ellagitannins are adsorbed.
Such a polyamide type thermoplastic resin has a relatively small penetrability of a fuel oil.
The resin has been conditioned with a sufficient concentration of hydroxyl ion.
This is a very desirable feature when the epoxy resin has a relatively high viscosity.
Preferably the resin has thiol or substituted thiol groups.
The mould is then removed from the oven and cooled until the resin has solidified.
A phenyl resin has been found to provide satisfactory results.
Continue the conveying until the procedural mass of resin has been transferred into the reactor.
Therefore the resin has a very good selectivity for palladium.
Incorporation of plasticizer into the PVA resin has proven to be a challenge.
Preferably said resin has been hypercrosslinked whilst in the swollen state.
However, the amorphous polyamide resin has low stiffness.
The resin has been then filtered using a sintered glass filter.
An example of such a suitable resin has the following formula,.
The resin has stable moldability in this range of melt index.
Also, an adhesive made of a resin has a molecular weight distribution.
Dry resin has about half the volume of wet resin.
For optical application, methacrylic resin has been widely used.
You'll also be interested in:
Examples of using Resin
Show more
Removes resin deposits from raw wood
Shell made from injected thermoplastic resin
Pour catalyzed resin onto prepared substrate
Examples of using Has
Show more
She has the baby with her
The incarceration system has been described as follows
It has signed or ratified the following instruments
