Examples of 'resin must' in a sentence
Meaning of "resin must"
resin must: This phrase is unclear and may be a typo or incomplete phrase. Further context is needed for accurate definition
How to use "resin must" in a sentence
Basic
Advanced
resin must
So the resin must be protected against oxidation.
After this the epoxy resin must be baked.
Therefore resin must be added to increase tack.
Pressure on the surface of the resin must be prevented.
First the resin must be resistant to decay.
The condensable hydroxyl content of the silicone resin must not be too high.
Dried resin must be heated or pressed to make it malleable.
For this to happen, the resin must be resistant to decay.
The resin must be evenly distributed over the surface.
To practice this invention, the particulate resin must first be liquified.
The term resin must not be considered as limiting.
For etching submicron patterns, the thickness of the deposited resin must be eM ≏ 0.7 um.
The cast resin must satisfy a variety of requirements.
First, the starting resin must be resistant to decay.
The resin must never be under a pressure at which water boils.
See also
For certain applications, the toughened resin must also exhibit good solvent resistance.
The resin must be soluble or dispersible either in water or in an alkali solution.
For example, a thermosetting resin must remain fusible or molten in the device.
The resin must be stable in the presence of the unpolymerized contact lens formulation.
With the Seemann and Palmer processes, the resin must be gelled immediately after part infusion.
The amino resin must be compatible with the epoxidized monohydroxylated polydiene polymer.
In addition, a good water-absorbent resin must also be nonirritant and cheap.
The resin must provide a good mechanical bond and have high dielectric strength.
The carboxylated polyamides resin must have an acid number of 65 or higher.
Resin must be kept on the ground behind the pitcher 's plate when not in use.
For these operations, the resin must be prepared directly in the operating theatre.
The resin must form an impervious jacket ;.
The epoxy resin must be crystalline.
The resin must be replaced or regenerated causing significant expense, process complication, and downtime.
The thermoplastic resin must therefore be present in significant quantity.
The resin must be able to withstand temperatures of approximately 110 ° C. without deforming.
Therefore this resin must be regenerated from time to time.
The resin must be evacuated, i.e. degassed prior to the vacuum infusion process.
The ion exchange resin must only be used for one operation.
The amino resin must be compatible with both the telechelic and the heterotelechelic polymer.
The optimum quantity of resin must thus be determined by taking these factors into consideration.
The tackifying resin must satisfy the MMAP requirements discussed above.
Finally, the resin must be homogeneous before cure.
The protective resin must be cross-linked at a low temperature.
Additionally, the resin must be swellable in the solvent used.
In addition, the cast resin must be insensitive to ultraviolet rays and to moisture.
For this reason, the resin must be extracted before formulating feedstuffs.
Before use, the resin must be left to swell for 24 hours in a 9N HCl solution.
