Examples of 'resistive film' in a sentence
Meaning of "resistive film"
Resistive film: This phrase usually describes a thin layer or coating that has resistance to the flow of electricity. It is commonly used in electronics and engineering
How to use "resistive film" in a sentence
Basic
Advanced
resistive film
It is advantageous to anneal the resistive film to improve microstructural stability.
The resistive film is subsequently trimmed to the exact desired resistance value.
The slot element can be covered with the resistive film or be uncovered.
A resistive film is provided on the side of the substrate remote from the heatsink.
A potential gradient develops as the electrons diffuse through the resistive film.
For example, it can be a resistive film heater housed in a ceramic block.
Termination film material is applied to the end portions of the resistive film.
The heavy-type resistive film is made of a mixture of a binder, support and metal oxide.
The layer of emissive material need only cover part of the resistive film.
A photoconductive, resistive film 48 is deposited on the electrical conductors.
Vacuum deposition is the technique used to deposit the resistive film on the ceramic.
The thickness of the resistive film is equal to or less than 0.1 micrometer.
This layer of emissive material can be separated from the conductive part by a resistive film.
Such a heating device is also known that comprises a resistive film incorporated in the wiper blade.
Preferably, resistive film 11 is directly screen printed onto substrate 10 by a suitable screen printing apparatus.
See also
They are just as carbon film resistors constructed with a resistive film around a cylindrical body.
The deposited resistive film 13 is, in the example, substantially square.
However, for heating liquids it is stated that continuous resistive film is preferred.
Digitizer 52 may use electrostatic, resistive film or capacitive / electrostatic film technologies.
For example, the rear touch panel 21 may be of a resistive film type.
The resistive film 7500 is removed everywhere outside the tube.
FIG . 1 a perspective view of a microstrip line terminated by a resistive film.
Resistors R1 and R2 are the transverse ( annular ) resistive film values of the slurry loaded polishing pad.
Preferably, resistive film 11 is spaced -- except for connector portions -- from both ends of the substrate.
On these cathode electrodes 45 are placed successively a resistive film 46 and a layer of emissive material 47.
A second rectangular resistive film 95 is deposited between leg 92 and trace 88 and overprinted thereon.
Referring next to Fig . 3, a resistive film 11 is applied to the exterior cylindrical surface of cylinder 10.
You'll also be interested in:
Examples of using Film
Show more
The film has not started yet
We are finishing the film about that invention
Film can be applied without disconnecting pump
Examples of using Resistive
Show more
The device has a resistive touch panel
Resistive and projected capacitive touch screen
Metal oxide based resistive gas sensors
