Examples of 'retaining cap' in a sentence
Meaning of "retaining cap"
retaining cap: A retaining cap is a protective cover or cap used to secure or hold something in place. It is often used in engineering or construction to prevent components from moving or becoming loose
How to use "retaining cap" in a sentence
Basic
Advanced
retaining cap
Check torque of blade retaining cap screw.
Remove the retaining cap by turning as indicated by the.
A seal assembly on a shield can be in mechanical communication with a retaining cap.
Thread the retaining cap on the drive shaft.
If this does not solve the problem, replace the retaining cap.
Do not hold the retaining cap on the ground.
The retaining cap is removably connected to the connector by the projections.
Apparatus and method for a cooled retaining cap of a plasma arc torch.
Tap the retaining cap lightly on the ground while the.
If additional line is required, wait a few seconds before retapping the retaining cap.
An improperly installed retaining cap or spool could fly off the trimmer.
A retaining cap can define a first liquid coolant channel and a second liquid coolant.
The manufacture of a representative platinum electrode assembly 2 with a pressure retaining cap is described below.
Disclosed is a shield retaining cap for retaining a shield to a plasma arc torch.
On On Part in place error, the retaining cap.
See also
Retaining cap comprising a relief housing at least a portion of the brush seal ; and.
The back portion is provided with a retaining cap 19.
Therefore the retaining cap can become lost, if separated from the retainer.
Figure 11 is an isometric view of a retaining cap for mandrel adjustment.
The portion 3 a may correspond to a relief, in particular a hollow, on the retaining cap 3.
The retaining cap includes a slotted formation 54 to facilitate removal from the mandrel 13.
FIG . 5 illustrates a schematic view of a retaining cap mounted on an LED lamp ;.
A retaining cap 90 holds the heating nozzle and cutting nozzle in place on the torch body 69.
FIG . 4 illustrates the mounting of a retaining cap on an LED lamp ;.
As a result, retaining cap 18 is not rotatable relative to tubular element 12.
Unscrew and remove the two ( 2 ) brush retaining cap screws.
The bearing retaining cap 64 is attached to the transmission housing 20 with a plurality of fasteners 66.
The first thrust bearing 52 is retained between a second thrust bearing 54 and a bearing retaining cap 64.
One suitable connector means is an end retaining cap 26 shown in phantom in FIG . 3.
Referring again to Fig . 1, the food retaining apparatus includes a core retaining cap 30.
You'll also be interested in:
Examples of using Cap
Show more
Retighten the cap to the filter housing
Cap and back panel sheet steel
Do not install cap onto water bottle
Examples of using Retaining
Show more
Do not run retaining straps over handles
Do not over tighten the retaining knobs
Recruiting and retaining qualified language staff
