Examples of 'retaining nut' in a sentence
Meaning of "retaining nut"
A retaining nut is a type of fastener used to secure or hold components in place within an assembly. It is typically threaded and used in conjunction with a bolt or screw to prevent the loosening or displacement of the connected parts. Retaining nuts are commonly used in mechanical, automotive, and construction applications
How to use "retaining nut" in a sentence
Basic
Advanced
retaining nut
Remove retaining nut to drain system.
Slide the lamp connector up to the retaining nut.
To secure the retaining nut on the.
The retaining nut grew weaker and weaker.
Install the compression top cap retaining nut by hand.
A loose retaining nut is common as well.
It may be made of a different material to the retaining nut or bolt.
Knurled retaining nut for plastic nozzles with tip.
The threaded rod receives a retaining nut at one of its ends.
The retaining nut may be worn or damaged and should be replaced.
Install rear light unit in bumper and tighten retaining nut.
Loosen the bar retaining nut so they are fi nger tight.
Fit the fi lter retaining washer and tighten the retaining nut.
Loosen the retaining nut using a wrench and remove the.
Install the keel in the hull and fit the retaining nut to secure it.
See also
A retaining nut may then be added to clamp the parts together.
Attach the pump assembly retaining nut and turn it clockwise to lock it.
The body preferably has an external thread on one end for engaging a retaining nut.
Find the retaining nut located on the inner side of the lid.
Preferably said second abutment surface is formed by a retaining nut passing through the plate.
Rotate the retaining nut locking tabs to lock the lamp connector in place.
Record the initial tightening torque for an end fitting that uses a threaded retaining nut.
Replace the tip and screw the retaining nut on to the barrel assembly.
A retaining nut is threadable onto the nose end for connecting the tool to a nose assembly.
Remove the sediment bowl by rotating the retaining nut Ref.
Typically there is retaining nut for retaining the inner body member in position.
Disconnect the lamp connector and UV lamp from the retaining nut.
Remove the retaining nut from the dispenser with the aid of a small coin.
Pull the lamp connector along with the UV lamp from the retaining nut.
Do not over tighten the retaining nut as over tightening can crack the grinding wheel.
And the jack-screw was now held only by a single retaining nut.
This retaining nut prevents the fence from falling off the end of the guide rail.
In other embodiments, the retaining nut does not have pads.
A retaining nut operatively associated with one of the handle portion and the claw member ; and.
Use a 6 mm socket to remove the retaining nut from the compression top cap.
Carefully push the grill element up into its original position and re-tighten the retaining nut.
Connect aerial Ensure retaining nut is secure and aerial is fully extended.
Reinstall the quartz sleeve with lubricated O-rings, followed by spring and retaining nut.
Checking tightness of retaining nut on pulley, and tighten if necessary.
Attach the lamp connector to the UV lamp, slide the connector over the retaining nut.
Check tightness of retaining nut on pulley, and tighten if necessary.
Secure the pushrod connector with the retaining nut part 16.
Screw the bar retaining nut by hand until loosely 5b.
Spinneret assembly 10 is heated by band heater 7 circumferentially disposed around retaining nut 6.
Properly torque the retaining nut and valve core to manufacturer 's specs.
The elements of the valve are held together by the retaining nut 306.
Using pliers, unscrew the retaining nut that secures the cable to the transmission tailhousing.
The opposite end of the support member 28 includes a bayonet type coupling with a retaining nut 34.
Hand-tighten the retaining nut onto the cord holder from inside the ice machine rear panel.
A valve casing is formed by mounting a packing retaining nut 32 by a screw to a valve body 31.
You'll also be interested in:
Examples of using Nut
Show more
I am kind of a hard nut to crack in that department
A nut who knows a lot about bombs
Loosen the bottom nut to eliminate water
Examples of using Retaining
Show more
Do not run retaining straps over handles
Do not over tighten the retaining knobs
Recruiting and retaining qualified language staff
