Examples of 'return stroke' in a sentence
Meaning of "return stroke"
return stroke: a term often used in sports or games to describe a decisive or significant response or action following an initial move by an opponent
How to use "return stroke" in a sentence
Basic
Advanced
return stroke
Return stroke initiation with external signal.
Reduce the pressure on the return stroke.
Damping in return stroke is less considerable.
The pumping stroke is followed by a return stroke.
Time of return stroke.
I did not account for the action of the return stroke.
Air assisted fast return stroke for rivet setting tool.
Ratched wrench for pre and return stroke.
A return stroke can be achieved by any of the previously mentioned methods.
Light in the return stroke.
The piston is movable through a forward stroke and a return stroke.
Move forward after the return stroke and stand firmly again.
One stroke in one direction and one return stroke.
Use the carriage return stroke to move down to new lines in the memo.
Lift file away from the steel on each return stroke.
See also
On the return stroke the same happens but the strike will be muffled.
Avoid the previously cut material during the return stroke.
The drop is expelled during the return stroke towards the rest position.
The fin is feathered to reduce drag for the return stroke.
On the return stroke of the pump mechanism a vacuum is created inside the reservoir.
Lift the file off the material on the return stroke.
This design allows for a faster return stroke as compared to the forward feeding movement.
This continues the deceleration of the slide during its return stroke.
During said return stroke the material for the pattern is strewn on the top layer.
A tappet return spring effects the return stroke of the tappet.
As a result, the return stroke e r is greater than the go stroke e a.
The spring is preloaded under tension to offer a return stroke upon release.
As a result, the return stroke er is greater than the go stroke ea.
This second film is then exposed during the return stroke of the cradle.
In this case, return stroke feedback is not really felt by the driver anyway.
This consumption of compressed air during the return stroke is believed to be unnecessary.
The first is elimination of mechanical shock to the operator during the return stroke.
The energy in the dual piston hammer return stroke becomes impact energy.
The single piston hammer does waste some energy at the end of the return stroke.
When eccentrics are used, the return stroke is made through springs.
A hose buffering takes place automatically on the road surface during the return stroke.
That is, one stroke in a first direction, and a return stroke in the opposite direction.
Exhale during the exertion stage of each repetition and inhale during the return stroke.
On its return stroke the piston plunger provides room for a subsequent dose in-filling.
The initial conditions are restored during the return stroke of the bar pusher.
During the return stroke of the piston, the lever-ratchet mechanism executes the return ratcheting.
This results in a very simple and reliable return stroke of the piston rods.
The return stroke then displaces the gas from the combustion-expander into the atmospheric-cooler.
This duct takes the pressurized fluid for the return stroke of the piston.
The return stroke of the volumetric pump takes another 16 msec.
These keep napkins from being drawn back into the mechanism on the return stroke.
Therefore, the return stroke is accomplished in about 160 degrees of crankshaft rotation.
A very small underpressure is thus also maintained in the suction box during the return stroke.
After the working stroke, the slide moves through a return stroke back to its initial position.
This places valve seat 70 and valve head 62 in position for release during a return stroke.
