Examples of 'rigid metal' in a sentence
Meaning of "rigid metal"
The phrase 'rigid metal' describes a type of metal that is stiff, inflexible, and not easily bent or deformed
How to use "rigid metal" in a sentence
Basic
Advanced
rigid metal
Do not use plastic or rigid metal duct.
Only rigid metal duct work should be used.
Do not use plastic or rigid metal ducting.
Use rigid metal ductwork only.
Use rigid or semi rigid metal duct.
Rigid metal or flexible metal vent.
Bumpers were at first just rigid metal bars.
Mm diameter rigid metal duct recommended.
Rigid metal ducting only inside the dryer.
Use single wall rigid metal ductwork only.
Inner members between the frames are rigid metal.
The type of vent rigid metal or flexible metal.
Rigid metal vent is recommended to prevent crushing and kinking.
Use only rigid metal ducts.
Rigid metal vent is recommended to avoid crushing and kinking.
See also
We strongly recommend using rigid metal exhaust duct.
Rigid metal transition ducts reduce the risk of crushing.
An airship has a rigid metal hull.
Rigid metal transitions ducts reduce the risk of crushing and.
The wire is usually made of rigid metal or plastic.
Rigid metal construction.
Bumpers were just rigid metal bars.
Rigid metal tripod.
The backer sheet may consist of a rigid metal plate.
The use of a rigid metal ducting is recommended for best drying performance.
The product is not intended for connection to rigid metal conduit.
But platinum is a rigid metal that can not be distorted without being damaged.
Connecting the dryer to house vent rigid metal transition duct.
These rigid metal surfaces will break down after initial compression has occurred.
These transducers are terminated by a rigid metal ground acting as an ultrasound emitter.
The mooring dolphins are also attached to the seabed by rigid metal piles.
This solution is suitable for a rigid metal conductor of a particular conventional electrical circuit.
This is however not possible when using rigid metal elements.
The grid is formed by rigid metal wires distributed angularly around the bulb.
The dolphins are also fixed to the sea bed by rigid metal piles.
The maximum duct length for rigid metal duct is shown in the table below.
In most cases the indenter is attached to the holder using a rigid metal bonding process.
The presence of such a rigid metal plate inside the mouth is both unaesthetic and uncomfortable.
Replace any plastic or metal foil vent with rigid metal or flexible metal vent.
Rigid metal packaging if not considered in PRT PACK.
Standard exhaust installation with rigid metal or flexible metal vent.
Therefore, rigid metal barriers are employed to achieve this function.
The apparatus consists of two rings that hang freely from a rigid metal frame.
In another embodiment the rigid metal roll and the deformable roll can be coupled kinematically.
Replace any vinyl or metallized plastic foil vent with rigid metal or flexible metal vent.
Gas pipe is made from rigid metal and not from plastic like water pipe is.
Standard rear exhaust We strongly recommend the use of rigid metal exhaust duct.
Four-inch rigid metal ducting should be used.
For products requiring ventilation, rigid metal.
For best drying performance, rigid metal vents are recommended.
You'll also be interested in:
Examples of using Metal
Show more
But there is metal in the electrolyte regulators
It sounds like a wheelchair going down a metal staircase
Plastic or metal foil vent is not recommended
Examples of using Rigid
Show more
Rigid steel and cast aluminium structure
Connection with rigid annesied copper pipe
Rigid plastic glazings other than windscreens
